Recent content by bshipley78

  1. bshipley78

    9n all new wiring assistance

    The wire from alternator to power post and the jumper is 14ga.
  2. bshipley78

    9n all new wiring assistance

    charged up the battery and tested it and I got 12.74 volts then with the tractor running the battery read 12.38 volts and 12.30 volts coming off the post from the alternator
  3. bshipley78

    9n all new wiring assistance

    Thanks everyone for the inputs, I'll test batt voltage and running voltage as well and repost with the numbers.
  4. bshipley78

    9n all new wiring assistance

    Yes, just the one wire. Ground to chassis. Should I maybe look to doing the 3 wire setup?
  5. bshipley78

    9n all new wiring assistance

    It is showing 10 positive...but the tractor died from too much load behind it in the box blade. Went to go start and the battery was dead. I'll start it up and test voltage numbers and repost. Thanks for the assistance.
  6. bshipley78

    9n all new wiring assistance

    Okay, so everything is wired up and able to start but I am getting no charge to the battery. The alternator is showing charge out the post. I have it wired for single wire. The wire from the post back to the battery is at least 14ga or possibly 12ga. The ammeter isn't showing much of a...
  7. bshipley78

    9n all new wiring assistance

    Thank you to everyone who has replied with information and the willingness to assist.
  8. bshipley78

    9n all new wiring assistance

    I have sent you a direct message 👍
  9. bshipley78

    9n all new wiring assistance

    here's what I have
  10. bshipley78

    9n all new wiring assistance

    so then does the jumper wire I have currently connected to the negative on the ammeter need to be attached to the battery positive? So alternator, solenoid and ignition switch wires to the positive on the ammeter and battery positive to the negative on the ammeter?
  11. bshipley78

    9n all new wiring assistance

    Just wondering if all my wiring is correct.
  12. bshipley78

    9n all new wiring assistance

    Sorry, The tractor turns over but won't start.
  13. bshipley78

    9n all new wiring assistance

    Okay so help me out with this wiring it's confusing me now I have a single wire alternator going to the positive side of the ameeter on the negative side of the ameeter I have a small lead that goes to the power SharePoint on the resistor block from the resistor block I have a hot wire going to...
  14. bshipley78

    9n all new wiring assistance

    Correction....sorry; the line with the NTE5814 diode plugs into the two tab resistor.

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top