(800) 853-2651
SHOP NOW

Recent content by Eagle Doc

  1. E

    1030 info

    Sorry about the double post, I don't know why that happened.
  2. E

    1030 info

    I have been using mechanical temp gauges. With them I don't have to be concerned with matching the sender to the gauge. They should be fairly accurate and I get them at an auto parts store for around $30. I have used them on working machines where we were not concerned with keeping everything...
  3. E

    1030 info

    I have been using mechanical temp gauges. With them I don't have to be concerned with matching the sender to the gauge. They should be fairly accurate and I get them at an auto parts store for around $30. I have used them on working machines where we were not concerned with keeping everything...
  4. E

    Case 830 Tach drive size

    3/4" Fine thread
  5. E

    Case 1175 hydraulic pressure won't lift disc

    The hoses need to both be hooked up to the top couplers or both to the bottom. Since Case is new to you maybe you have them hooked wrong.
  6. E

    My observation concerning new format

    I don't frequent too many other sites either and have always used the classic view. Nothing has posted on classic view since Thursday. I thought the problem was with our ancient computer but found out on another one that it is the site. I hope I can learn how to use this site before it changes...
  7. E

    Spring planting 92

  8. E

    Draft o matic lowering spool

    Don't do anything with the lowering spool until the last resort. Check that the springs that go from the shaft that the arms are on and go to the front draw bar bracket have tension. Also make sure the lower sensing rod is hooked up. Make sure both cables are working as they should.
  9. E

    hydraulic help ?

    There are a couple of parts in the remote valve called the primary shuttle and secondary shuttle. I have fixed this problem on a few tractors that it was a simple as replacing the oring on one of the shuttles. I was hoping mEl or someone would explain it for you better than I can. You can send...
  10. E

    Case tractor model numbers

    When the 1170's came out there was a problem in the differential. One of the major parts did not get the final heat treatment and was not hard enough. All of them that the dealer where I worked soon went out. I heard that there also was a problem with air cleaners that caused engine failures but...
  11. E

    2096 hydraulic valve problem

    Since this tractor is new to you, are you aware that pushing the remote lever all the way forward is the float position?
  12. E

    Case 4890 4 wheel drive won't reverse

    A little more information is needed. If you could check the clutch pressures you could tell if a pilot spool is sticking. Another thing to try for a quick reference is to have the 4 speed in neutral, at idle shift through the gears and watch the tach and listen to the engine to see if the engine...
  13. E

    dieseltech

    The rack is not stuck, the drive gear turns normally. Oil ran out of it when I picked it up to look at it. I assume you got the email I sent. If you sent me an email I did not get it, but my email sometimes doesn't work. Thanks for the reply and I appreciate your helpfulness and the knowledge...
  14. E

    dieseltech

    I would like to talk with you about several questions I have about a fuel pump fitting on my tractor. My email is open, I use the classic view.
  15. E

    Case 2290 wont reverse

    Need more information. Does won't reverse mean the lever will not go back to reverse or that it won't move when shifted to reverse? I use classic view and my email is open.
See more
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top