Joe_R's latest activity

  • J
    Joe_R replied to the thread 600 governor cover gasket.
    I did make my own gasket using 1/32 material with a very thin coat of silicone gasket maker. I'm sure 1/64" would work just fine as...
  • J
    I know this was a very old post, but I just wanted to thank you for the pictures and measurements of the power steering filter retainer...
  • J
    Joe_R replied to the thread Power Steering Pressure Port.
    That's probably right. Think maybe this new pump wasn't machined deep enough. So, I machined the end of the banjo fitting bolt down just...
  • J
    Joe_R posted the thread Power Steering Pressure Port in Ford.
    I have a new Eaton style power steering pump. Everything seems to be the same as the original pump except there is something in the...
    • Port Old.jpg
    • Port New.jpg

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top