(800) 853-2651
SHOP NOW

Search results

  1. C

    massey pow steering

    turns fine to left and back but to right turns fine to right but hard to get back to straight
  2. J

    Wide front from 450 = wide front on a 300?

    I have a 1956 300 that has a narrow front. I have a buddy that has a 450 in his scrap yard with a wide front. Without me having to pull it off and compare... will the front end off the 450 fit on the 300?
  3. C

    re: 8N Replacement lift cylinder

    I have an aftermarked 8N lift cylinder that has a straight thicker edge at the outside opening instead of the original tapered version. I know that I am going to have to grind a notch in the side for linkage clearance. The question I have is; do I need to bevel all around the edge of the...
  4. C

    re: original 8N bumpers

    thanks for the information
  5. C

    re: original 8N bumpers

    Does anyone know if they made any of the original 8N bumpers that did not have the rivets and were welded instead ? The verticals are in the exact same position as original. The mounting hole plates are rounded instead of square. Due to the rust and condition the bumper looks very old and does...
  6. C

    Looking for this Fordson Tool

    Thanks for the info...I have already posted on Fordson forum.
  7. C

    Looking for this Fordson Tool

    Anybody have a spare one of these laying around collecting dust that they would like to part with ? E1ADDN17098 Fordson tool. (black tool in picture)
  8. C

    Ford 841D injector sealing washer question

    I purchased 4- 310947 injector sealing washers from CNH dealer for my 841D Ford Tractor. The package was open when I received and am not sure if these are the right size. Question I have is these washers are slightly larger than the originals I took out and was wondering if these washers are...
  9. C

    Need Head Torque info for 3 cyl. JD 310B backhoe

    The 152 cid engine is evidently the gas verson. Don't know if the sequence is the same but thanks anyway.
  10. C

    Need Head Torque info for 3 cyl. JD 310B backhoe

    No, its got a 164 cid 2.7 L engine
  11. C

    Need Head Torque info for 3 cyl. JD 310B backhoe

    Had to remove head on my 3 cylinder John Deere 310B Diesel Backhoe. I need to know the head torque pattern and torque specs. If you have a manual could use a posting of pictures of torque pattern. Any help would be greatly appreciated.
  12. C

    re: 8N grill repo

    Thanks for the information on the grill this is helpful.
  13. C

    re: 8N grill repo

    Has anyone had any problems with 8N repo grill sold by AI. When installed the grill sticks out an inch at the top from the hood emblem. Don't know if the hood is bent in that much or the grill has the wrong angle at the top. Does anyone have a good grill or Dennis Carpenter repo that they can...
  14. C

    Ford 801 Diesel Roosa Master Pump leak question

    Thanks for the information...that is what I thought...just wanted to make sure before I took plate off.
  15. C

    Ford 801 Diesel Roosa Master Pump leak question

    Here is photo
  16. C

    Ford 801 Diesel Roosa Master Pump leak question

    I recently posted a message about a leak at the bottom screw to the right of timing view window. In the picture the bottom screw has a drip of diesel. I now believe the leak is being caused by the 1 in X .070 (size 022 oring behind the oval plate. Was wondering if it is safe to take the plate...
  17. C

    4000 4cyl. Diesel injection pump leak

    Thanks so much for the information. I thought it might be some form of adjustment so I did not want to mess something up. I have to change gaskets on valve cover, pushrod cover, and injector rubber seals to stop leaks. When I do that I will repair the leak on the pump. Thanks again...Charles
  18. C

    4000 4cyl. Diesel injection pump leak

    I have a Ford 4000 diesel injector pump leak at the bottom small allen screw on the right side of pump shown in the picture. The screw that hold the oval cap. Is this an adjustment screw? Can this be tightened or removed without changing adjustments? Any idea of how to stop drip leak? In...
  19. C

    Question: Aico VM-3A hydraulic selector valve

    The knob looks original to me. It says on the knob, PULL FOR EXTERNAL SERVICES. In the middle of the knob it says FOMOCO. I have seen other AICO valves of this type on EBAY and the knobs are shaped the same but with no writing. Anyway I thought this was interesting.
  20. C

    Question: Aico VM-3A hydraulic selector valve

    I found an Aico VM-3A selector valve at a junk yard at a resonable price. I want to install it on my Ford 801 diesel tractor. Does anyone have a picture of the hose hookups or direction on where the hoses go? Also oring seem to be a -113 which need to be replaced. I was told that it needs to be...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top