(800) 853-2651
SHOP NOW

Search results

  1. D

    Shop Wiring

    Ok friends I'm ready to start trying to wire the inside of my shop. I'm going to use 10/2 for recepticales and 12/2 for the lights. My question is would you run it in sch 40 pvc, metal conduit or just staple it to the walls and ceiling. The 10/2 will be run along the top of the walls and down a...
  2. D

    Light Fixture question

    Good day my friends. My tractor/work shop is 24' deep and 36' wide. I've got a bunch of 4' 4 tube fluorescent fixtures and bulbs. The small diameter ones not the big ones. I'm not sure what you call them. Anyway how many would you put up and how would you arrange them? I'd appreciate any and all...
  3. D

    Retirement

    Well after 41 years and 10 months come September 30th I'm retiring. After losing my wife in 2021 if something would happen to me all my retirement and social security would just be gone. So I'm cashing in at 62 which I'll be on September 13th. It's kind scary since I've worked ever since I was...
  4. D

    460 LP

    Does anybody have everything i would need to swap a 460 LP over to gas? I'm looking at one but the regulator has been changed out with another one that the people couldn't get to run. It has duels and a front blade. I'd like to have it if I could get it going cheap enough. I know I'd need sheet...
  5. D

    Taylor Way

    Does anybody know where I can get parts for an old Taylor Way 6' finish mower model 22372 or are they no longer available? I haven't had any look searching online. Thanks for any help I hate to scrap it. I bought it 15 years or so ago from a friend cheap and it wasn't used much knowing I'd need...
  6. D

    Shop Wiring

    Morning my YT friends. I'm moving out to my property finally and getting ready to wire my shop. I've got a couple of questions for the brain trust. I'm getting one of those 100 amp shop boxes from Lowe's. The 30 amp breaker will be for my welder which the plug will be right below the box. Will...
  7. D

    Heli Coil

    Well I ordered a kit on line with the drill bit, tap and heli coils to try and fix my 3000 steering problem. The 3 bolts that hold the add on power steering cylinder bracket and radius arm ball on stripped out. Any tips or tricks to make drilling and tapping those easier? I know to go slow and...
  8. D

    Steering Help

    Good morning. I need your help with a problem I've got and how to get it fixed perferably quick and do it right this winter when I'm not using it. The problem 1965 3000 ford diesel and I added a aftermarket power steering kit to it. Where it attached to the radius arm socket with a still plate...
  9. D

    Walmart Tires

    Got lucky the other day at Walmart. Someone ordered 2 BKT 6.00x16 3 rib tractor tires on line and didn't want them. They had them on the clearance tires and I got them for $41.50 each. I wish the guy had ordered 6 or 8!
  10. D

    Ford Sickle Mower

    Morning everyone. Over the winter I want to fix up my sickle mower it's a Ford 14-ninety something memory lapse at the moment! It has space between some of the blades and the cutter on the brackets instead of them rubbing together and they're all chipped up. Where do you guys get your parts for...
  11. D

    Water Line Size

    Well I bought me a double wide and I've got the septic permit and it's been drawn out. I'm waiting on the house permit now then they'll deliver it. I've decided to hook onto the city water verses digging a well as the well will cost around $15,000. The city will put in a meter with a 1 hookup...
  12. D

    Wiring

    I'm pretty sure I could figure it out but thought some of my brilliant friends on here could make it a lot simpler and faster for me if they had a diagram or something. Here's what I've got. Jubilee converted to 12 volt push button starter not the one on the transmission I added one to the dash...
  13. D

    Gap

    Just making sure I remember correctly I'm fixing to do a tune up on my Jubilee and the points and plugs gap at .25 right? Thanks.
  14. D

    Grandpa Love

    Hey just wondering how that MF backhoe loader is working out for you. I'm thinking of getting one to do some clearing and work around my place. Nothing huge brush and small trees. I'll have to find a dealer close to me all I know of are Kabota and Deere around close.
  15. D

    Ignition Switches

    Got a question for the brain trust here. I've got two 3000 ford diesel tractors and one I'm working on to try and get running that needs an ignition switch. I've also got a 600 that needs one as well the one i put on a few years ago fell apart. My question is would you get 2 3000 switches and...
  16. D

    Off Topic Kind Of

    It is about a Ford! My sisters 2009 Ford Ranger with a 2.3L 4 banger. Driving down the road it just dies. Mash the clutch and hit the starter cranks right up. It will do it 4 or 5 times going about 5 miles or so. I can let it idle as long as the trip would take and it never does it so I'm having...
  17. D

    wife

    I posted another comment but it couldn't be shown either because I put what she died with Saturday or where I knew she had went. Anyway I asked you for prayers about a month ago for her but she went home Saturday. We were married for over 33 years and it still doesn't seem real and I'll miss her...
  18. D

    Wife

    About a month ago I asked for prayers for my wife she was in the hospital with nnalert. They ended up putting her on a ventilator which she was sedated completely from then until last Saturday when she went home to be in or Lords arms. I was there with her when she left and it was very peaceful...
  19. D

    Wife's Update

    They turned her ventilator down to 75% and her oxygen is still holding at 97%. Thanks for everyone's prayers keep them coming I'm believing for complete healing!
  20. D

    Prayers Needed

    Hello my friends. Today is my first day back at work in almost 3 weeks. The virus kicked my butt but I'm over it now I think. My wife however has been in the hospital for almost 3 weeks with it and I need your prayers for her heeling. Today her oxygen is up to 92% with the bipap machine on. We...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top