Search results

  1. J

    John Deere B oil pressure

    I have a 1945 John Deere B and was wondering about the oil pressure. The glass in the old oil pressure gauge got cracked a number of years ago. The gauge soon stopped working. I finally bought a new gauge and got it installed. The new gauge always showed low pressure. I bought a test gauge...
  2. J

    Garbage disposal problem

    Have had a disposal with a septic system for 40 years. Replaced disposal once. No problem with the septic system.
  3. J

    Tire Changer and Balancer

    We had an old hand operated one on the farm. With a little effort it worked good.
  4. J

    AR Governor

    I had that problem with my AR. Turned out the governor wasn't getting any oil. It oils thru a little hole behind where the oil pressure line comes out. The hole was plugged up. Cleaned out the hole and now it works great.
  5. J

    John Deere 2 bottom plow Model 44

    I have a #44 plow. Bought my last ones from John Deere dealer. Price wasn't too bad.
  6. J

    Low Oil Pressure on 1945 B

    I have a 1945 John Deere B. I replaced the oil pressure gauge recently because the old one hasn't worked for a couple of years. The gauge I bought is like the original except it doesn't say John Deere on the face. When I run the tractor the gauge reads a little above the Stop point. Doesn't...
  7. J

    Low Oil Pressure on 1945 B

    I ordered a gauge that reads in PSI 0-15. I'll see what that says and go from there.
  8. J

    45 John Deere B with Wico X mag

    I've been using my B to haul firewood to the wood pile. It has been running great until I started it to take a load to the woodpile this morning. It started but with the transmission in neutral and clutch disengaged ran like it was pulling a big load up a big hill. Would hardly move itself in...
  9. J

    1945 JOhn Deere B with a Wico X mag.

    I've been using my B to haul firewood to the wood pile. It has been running great until I started it to take a load to the woodpile this morning. It started but with the transmission in neutral and clutch disengaged ran like it was pulling a big load up a big hill. Would hardly move itself in...
  10. J

    OIL ON CLUTCH LINING 1945 B

    The clutch on my 1945 B has been getting grabby lately. I thought it was probably oil on the clutch lining and when I took it apart that is what I found. The inmost lining was oily. What would cause oil to get on it? Thanks for any help.
  11. J

    OIL ON CLUTCH LINING 1945 B

    I have the pully off and see the hole. It is open. I always put the tractor in neutral and push the clutch in when I get off.
  12. J

    Water in D Cylinder

    Does it have a water injection valve. Might be something wrong with that.
  13. J

    1950 JD A valve adjustment

    Just tighten the valve adjuster til the pushrod won't rotate between your fingers then loosen the adjuster 1/3 of a turn. then you don't need to flatten the rocker.
  14. J

    Model A loose wheel

    fixed my B by making shims out of a tin can.
  15. J

    1950 8n ford 3rd gear tooth missing.

    I drove my John Deere B for several years with a broken tooth until on a cold day in January the broken tooth picked up in the stiff trans lube and got between two gears and bent a shaft in the transmission.
  16. J

    1950 John Deere B idles well, stalls under load or fast

    Isn't the fuel level in the float bowl suppose to be 3/4 below the bowl gasket.
  17. J

    Pulling Steering wheel

    Put the puller on and tighten it up. Then a little heat on the steering wheel hub and it should pop right off.
  18. J

    JD A rear wheel problems

    The collar isn't putting enough pressure on the 3 sections of the hub. Cut 3 pieces of thin tin and put under the collar then tighten it . I had this problem with my B on one side and this fixed it.
  19. J

    How to set the hitch on a plow?

    Get an operators manual for the plow. It will explain how to adjust the tractor wheels, the drawbar, and the plow.

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top