(800) 853-2651
SHOP NOW

Search results

  1. G

    CLARK continental Y91 fork lift cant find the timing ma

    this is a 4 cylinder gas 50's engine. I need to time this thing and I CANNOT for the life of me find the timing marks. No plate on the bell housing and no pointer or numbers on the pulley or anywhere around it. If any kind soul has any experience with these and tell me where on earth to...
  2. G

    Clark Continental L 4 cylinder Y91 fork lift..strange so

    This is an old Clark Y 91 gas forklift 4 cylinder. can anyone identify this sound? I crank it over and get this strange almost grinding sound or high friction sound. I can't really describe it. The motor will try to start then this sound happens and the starter solenoid starts to heat up. I...
  3. G

    Near catastrophic 3 point hydraulic nightmare.. Massey

    I am finally getting this little Massey Ferguson M35 diesel tractor up and running. The 3 point system on it wasn't working properly when I got it. The previous owner told me it would only go up about 6 inches and slowly at that. He had a guy put in a new cylinder and piston a few years back...
  4. G

    NEW! / old Massey Ferguson M35 diesel.. Could use a litt

    I just got this old M35 Massey Ferguson diesel from a good friend. My plan is to get it up and going and spruce it up. I had to order a new ignition switch for it. The old one is froze up. A good cleaning and an oil filter and change and I'll try to fire it up. The biggest issues are the rear...
  5. G

    FORD gasser 3400 need a break lever please!!

    I have a 1967 Ford Gas Tractor. It is a 3400 industrial with the bucket on it. It is missing the parking break handle mechanism. The one down by the right foot that goes through the foot plate. if any kind soul has one or knows where to get one please let me know. My property is hilly :D...
  6. G

    Bolens Iseki g154 2 cylinder need help with a busted PTO

    I have this little tractor at my place doing a favor for a good friend of mine who is disabled. He let one of his daughters try and box scrape a driveway and they broke the long shaft PTO. I am taking on the repair. I am not familiar with this kind of set up. I am hoping someone out there...
  7. G

    Help with lift control mechanism .. 67 Ford 3000

    I am doing some trenching with a modification I welded up for my blade. I am trying to get the level even on the scraper. I cant seem to get the control arm to work.. photo below. Any ideas on how that things works? thanks
  8. G

    At my wits end with this tractor! What am I missing here??

    Just did an in frame rebuild. Got it up and running. Starting perfectly firing right up running well. The water temp gauge on the tractor never worked so I installed a new aftermarket gauge. I found power on the two posts on the gauge cluster. The wires were cut by the previous owner. I...
  9. G

    FORD 3400 gasser. Need help removing crank hydro pump bolts

    Or whatever this thing is called? I pulled this mechanism off and noticed 2 really bent bolts. Looks like there is no way to pull the bolts without removing that housing. Any ideas on how to get those bolts out would be grateful.
  10. G

    In frame engine overhaul on a 3400 gas help appreciated!

    I decided to go ahead an attempt to freshen things up on this old tractor. I pulled the bucket off and next is the top end of the motor. I am unclear where to disconnect the steering in order to drop the oil pan. in the photo is it the red circle at the front or the red circle at the...
  11. G

    I could sure use some helps with a 3400 Gasser bucket rem...

    Doing this job alone. 1st time. In the photos below the front hydrolic pump I am not sure about which part separates? The pump looks like it is connected to the bolster. What bolts do I remove and how does it separate? And in the other two pictures is that the only other areas I have to free...
  12. G

    NEED a good writeup on removing the 3400 oil pan please

    The rain has come and my 3400 gasser is idle. Due to low compression in the #2 cylinder I decided to do an in frame engine overhaul while it's winter. The manuals I have don't the how to on getting the oil pan out. I understand the front has to slide forward. My 3400 has the bucket on in. If...
  13. G

    3400 with a zenith

    ive got a 3400, new Zenith and mechanical fuel pump. Runs well, no issues.
  14. G

    time to drop the oil pan on a 66 Ford 3400 gasser. need help

    I need to drop the pan and take a looksee at the oil pump. My oil pressure readings are a little low and I suspect the pump screen is clogged or the pump is worn out or the relief valve is funky. Either way I need to get the pan off. I read in the book to take the small bolts out (like a car...
  15. G

    Loader frame tube cracked! 3400 Ford Need advice W/pictures

    WOW! The surprises on this tractor keep on coming! In the first pick you can see where someone welded that plate on to stop the crack on the tube. The crack must have gone all the way around. The crack is at that joint up front near the bucket on the inside. Where is the drain plug for...
  16. G

    FORD 3400 Need help identifying a few components

    Below are a few photos of some components I have no idea what they do. My manual doesn't show ANY of these. Could someone tell me what they do and what they are used for?
  17. G

    ford 3000 gasser pic request or help with THIS wire..

    I have a ford 3000 gasser tractor and I need a picture or an okay about the wire pictured. That connector is the one that gets the resistor wire that goes over to the coil. (I dont have it hooked up in that picture) Does the male black wire side get that big Brown with the Red stripe wire...
  18. G

    Wiring help on a 3000 Ford Tractor.. with pictures

    Someone has been in the wiring of this old tractor and I wanted to make sure it is correct. There are a lot of cut wires and black ground wires that I don't know if they are grounded. Could someone out there take a picture of their setup or direct me in the right direction? I am no good at...
  19. G

    Help with a spin on oil filter adapter.. ford 3000 gasser.

    No instructions on this thing. I am wondering if that giant nut on the block come off and this new spin on adapter replaces it? Before I go reefing on things.. thanks. BTW any tricks to getting it off? Looks like it is on there tight.
  20. G

    boy do I need some help.. ford 3000 bucking and spitting

    SO~ I just did a major overhaul on this tractor. NEW carb, distributor, coil, solenoid, plugs, plug wires, cap, rotor.. basically the works all new. I also ran a rubber fuel line (replacing both hard lines) off the petcock at the tank through a fuel filter to the pump then rubber line from...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top