(800) 853-2651
SHOP NOW

Search results

  1. R

    Ferguson TO30 wiring

    Did you try testing for spark from the plug wire to the block? We have had occasios where the plug hole is carboned up and insulates the plug from the block. No ground. Clean up threads, and run wire wheel over plug threads unless they are new. Good luck!
  2. R

    TO30 Hydraulics (part 3)

  3. R

    TO30 Hydraulics (part 3)

    Just for information, and closure, the hydraulic problem is solved and they are working. It was a lot of work, but not hard. I can't say what the problem was because there were a few. The system couldn't work with the broken oil tube. To replace it the pump has to come out and the top lid...
  4. R

    Alternator choice

    Sorry for the confusion, Farmer. I was using the wording of the alternator vendors. They called it a replacement block. My mistake was thinking the rep block was from a to30. I was wrong there also. What it comes down to is that it appears no one is producing a bracket to fit the...
  5. R

    Alternator choice

    We are working on a to20 conversion. We ran into a problem with this statement "replacement Z-120 blocks were cast from Z-129 patterns. The result is two untapped bosses on the block behind the generator which prevent the alternator from mounting and this will not work" and are now confused...
  6. R

    Alternator choice

    Tom, it's not the wiring or the voltage. It is finding the brackets to fit our block. Still trying to determine if ours is like the one pictured above. Tom
  7. R

    Alternator choice

    [I wonder if that means if I look for to30 alternator kit it would fit on our 20?
  8. R

    GASKET SET QUESTION

    Okay, here is what I learned. The kiit is put together for about 37 different tractors. Not all pieces will be used for any tractor model. For instance, the gaskets for mounting the cylinder to the lid as in the TO20 (but not the 30) are included, but not the o ring which is used on the 30...
  9. R

    GASKET SET QUESTION

    I bought a hydraulic lid gasket set from here and am having trouble figuring out where to put them.. There are two green fiber washers about 2.5 in od, and an o ring about the same size. A key would have been nice, but maybe you folks can help me out.
  10. R

    To30 hydraulics part 2

    That picture .helps
  11. R

    To30 hydraulics part 2

    Okay, the head gasket, intake and exhaust gaskets plus the oil pan was taken off and cleaned. After all that the tractor started again. Now back to the hydraulics. Today I followed all the directions for taking the pump out. Everything went well until the removal. I had it on blocks so I...
  12. R

    To30 hydraulics part 2

    Do you remember if it was a pressed fit or a somewhat loose fit? Was there a flare at the top? I know it as been fifty years, but anything else you can remember would be a help.
  13. R

    To30 hydraulics part 2

    Is the tube just a press fit? The hole seems smaller than the tube' s od. Now I'm only looking at the hole in the pump base. If the top hole is larger it may work. The ends of the tube seem captured by the housing. Has anyone done this recently?
  14. R

    To30 hydraulics part 2

    Good news is that the pump is out and cleaned up. Haven't gone inside yet but tomorrow is another day. The activation rod was not broken, and when I saw the new control valve I could see how to get it aligned to go into the pump making room for the pump to drop. Heavy bugger when lying on...
  15. R

    To30 hydraulics part 2

  16. R

    To30 hydraulics part 2

    So as not to drive you guys crazy, I'm attaching a picture of the tube. It sits against the bulkhead by the drivers shin. It runs from the base all the way to the top cover. I cannot see either attaching point. It looks like aluminum. The Pic is from the left inspection cover. The split is...
  17. R

    To30 hydraulics part 2

    Okay, I've found part of the problem. Part of the control valve's activation rod broke off and is stuck in the bore. The square portion is caught on the body of the tractor not allowing the front to drop. I'm not sure if it is one piece or not. Before I ruin something important my new parts...
  18. R

    To30 hydraulics part 2

    Nope, sitting in a bucket in the corner. After it warms up a bit I'll try to raise it back into position. Between it's weight and accessibility it's hard to maneuver it.
  19. R

    To30 hydraulics

    That was supposed to say hoist isn't a problem. Sorry.
  20. R

    To30 hydraulics

    I have no hydraulics. Today I removed the leveling arms. I could raise the lift arms manually without resistance. Once raised, they fell rapidly back down with no resistance. This must mean something, but I don't know what. Where does it lead me? Thanks
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top