(800) 853-2651
SHOP NOW

Search results

  1. D

    2010 Power steering

    Update: With this adapter I made I was able to test the main hydraulic restricted flow and it was satisfactory. After restricting at least a dozen times I turned the steering wheel and had improvement, but still not stellar, my guess in because the main flow has always been open circuit and...
  2. D

    2010 Power steering

    Update. I have pressure and flow tested the input feed line to the power steering controller with dismal results. The book called for 2.25 to 2.45 gpm restricted to 1000 psi. Before I tried a restricted reading I closed the valve to dead head the circuit and only got 500 psi. The next step is to...
  3. D

    2010 Power steering

    One other thing I should have started is the year which I don’t know, serial plate is gone. I do know from comparing lots of things in the parts book that it’s at least a 42001, so it’s at least a 1963. There was a lot of changes after 42001. Dan
  4. D

    2010 Power steering

    As for oil flow I found this. See attached. In relation to selective control valve and rockshaft feed if it had these I think it would either (1)tee in the front cover, one going to the select valve and one going to the rockshaft and with both in neutral they would dump, (2) or they daisy chain...
  5. D

    2010 Power steering

    You are correct the power steering is not involved with the bypass, it comes off the pump as you stated just like the ag tractor. Because I don’t have any of the remote valve assembly I was thinking of tapping the bypass cap for pressure testing the pump and possibly a fluid source. I was...
  6. D

    2010 Power steering

    Thanks you in-depth explanation, no remote hydraulic coupler’s either. I can’t test pressure and flow in the power steering circuit yet because I had to order a inverted flare adapter to hook to the line. In the mean time I’m looking into the possibility of and internal leak that the manual...
  7. D

    2010 Power steering

    Does anyone have a picture of the trans with the top removed, I am trying to figure out where the rockshaft oil line attaches in the front of trans. I have the parts book but doesn’t show it. I don’t think mine has it because no rockshaft on this unit, but there’s no reference to a cap if not...
  8. D

    2010 Power steering

    I did find something in I&T, it does have some value. See attached. Thanks
  9. D

    2010 Power steering

    Yes, not sure of the term “stinger pump” but the loader and hoe pump is on the front with a separate reservoir and is not part of the system that I’m having problem with. Thanks Dan
  10. D

    2010 Power steering

    The loader and hoe are run by auxiliary pump on the front so the only thing the main pump does is power steering on trans lube. PC731 page 137 “ rockshaft oil line” I’m assuming it doesn’t have because they is no rockshaft. I have a homemade rig that I can pressure and flow test the steer at the...
  11. D

    2010 Power steering

    Hello, Having a problem with power steering on a 2010 Wheel loader (industrial), go figure, lol. I try not to waste you good peoples time and read as much as I can. I have all the manuals but not sure how to do pressure testing before removing pump or giving up, I have the JD service manual...
  12. D

    Ford tractor hat

    Good morning. Wanted to pass this along. I wear hats and was looking for a "Ford Tractor" hat that wasn t like a trucker hat, I wanted one that was a unstructured baseball style that was truly embroidered, not a embroidered iron on. I ordered this and really like it, nice hat. They only had the...
  13. D

    Ford tractor hat

    Maybe I m using the wrong terminology, mesh back, structured tall front for lots of advertising space.
  14. D

    Clutch Slipping

    I put one in backwards in an IH 2500, lasted about a year and started slipping, figured it out when I went back in.
  15. D

    Tw-5 Hydraulic pressure.

    Rod, got my fitting and did a test today. Setup: Removed male QC (quick connect) off my gauge and replaced with female, took the male QC and plugged the end and put it in the remote that gave me the highest reading, wasn t sure if the remote would deadhead without anything in it. Disconnected QC...
  16. D

    Tw-5 Hydraulic pressure.

    Good morning. My TW-5 loader function seems lethargic when lifting heavy loads, bucket full of stone, also won t lift front of tractor. Allied 795 with 8 foot bucket. I will attach photos of how it s plumbed. I have a service manual for the TW and 30 series that covers a lot and some things...
  17. D

    795 Allied loader valve

    Good morning. I another thread I have been seeking help with performance of a loader on a TW-5. It has been suggested that the problem could be the loader valve. Can anyone help me identify this valve, I have the loader manual and there s nothing in it about the control valve. Loader was on...
  18. D

    795 Allied loader valve

    Thanks Rod, I will post back when I have update s.
  19. D

    Tw-5 Hydraulic pressure.

    Rod, I m am learning a lot about this system with your help, I take what you and other post, review the diagrams and thing start to fall together. To clarify two things, you said "main spool in a Rex valve" are you referring to main control spool in each remote or something else, maybe a typo...
  20. D

    Tw-5 Hydraulic pressure.

    Rod, great idea, I had the same thought and ordered a 1/2 pioneer female coupler to mount on my gauge last night. My loader break out numbers are based on 2500 psi, see what I get. After thinking about the system the problem could be the pump or pumps but it seems it could also be pressure loss...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top