(800) 853-2651
SHOP NOW

Search results

  1. H

    Cub Steering Gear Castle Nut size needed

    What is the size of the castle but on the steering gear for the cub? Threads in mine are not the best and I’d like to order the appropriate size tap and die to clean them up. Thanks! The nut part number is now 70119 D according to messicks but nla.
  2. H

    JD 38 Sickle Bar Mower mounting brackets

    I recently bought a nice 38 sickle bar mower I plan to use this year to make some hay for a neighbor. I want to run this on my 1020 gas as it has hydraulics on it and the mower is set up with a cylinder. The issue I am running into is the tractor side mounting bracket is from a Allis Chalmers...
  3. H

    Farmall Cub Forever - Out of business?

    Just went to Farmall Cub Forever's website and it seems like it is gone. I order a few small parts from them last year. Does anyone know if they closed up shop?
  4. H

    Frost Free Hydrant Repair Questions

    I have a frost-free hydrant that is two years old and leaking underground. It was been slowly getting worse all summer. Last winter during the only cold spell a hose got left on the hydrant however the water was not on. I am guessing this did damage. Does anyone have experience with...
  5. H

    Cub Steering Housing Gasket Repair

    I have a 1948 Cub that I use weekly to mow ditches are my farm with the mid-mount sickle bar mower. The gasket between the bottom of the radiator and the steering gear housing has started failing and working its way out between the two parts. I have to keep tightening the bolts holding...
  6. H

    Anyone own a Z Series zero turn

    Ended up with a lot more to mow this year with a rental property and now helping out a neighbor. I currently have John Deere X380 rider with 54 deck. I need to cut my mowing time down and the Z530M seems to be able to just about cut my mowing time in half. I have never owned a zero turn and...
  7. H

    6330 Knocking on Start up

    I am doing some spring tillage work for a friend with their 6330, 4x4 tractor. Sometimes on start up it sounds like it is knocking. Plenty of oil, no idiot lights on the dash. It goes away in about 5 minutes when it does it. Outside temp. does not seem to change if it does or does not do...
  8. H

    Kubota DT245 Coolant Leak

    I have a 1982 Kubota DT245DT that has coolant running down the back of the block near the fuel tank. Just noticed it the other day when I topped off the coolant. Engine oil is good and is where it should be at on the dipstick without a sweet smell. I am guessing somehow I have a head gasket...
  9. H

    3000 Adding Rear Remotes

    My Ford 3000 diesel, English made version, currently has the original Arps/Ford Dozer blade on it. This is hooked into the hydraulic system right under the seat with direct plumbed hard lines and hoses. I am going to take the blade off of it for summer use. I would like to put on rear...
  10. H

    40C Loader Info

    Does anyone have any information on what companies made loaders for the 40 crawler besides John Deere. I am looking at buying a crawler with loader and it does not look like any I have seen before. This one has two lift cylinders and two dump cylinders. The pump is a crank driven hydraulic...
  11. H

    3000 Headlight parts needed

    The headlights were not working on the 3000 I recently obtained. I took them apart and one side has what looks to be an original wiring set up. Quite a cool design with leather pads and all still intact. I did verify the bulb is working and got the light to work. The other side is just the...
  12. H

    4040 Open Station

    Looking to settle a debate - How rare is a 4040 open station tractor - not a cut down 4 post? There is one for sale locally with a high price tag and a few of us were debating if it is rare or not to justify the price. The tractor is nice, hours are below average, but other then that no reason...
  13. H

    3000 Serial Number Question

    Tried to figure out the year on my new to me 3000 diesel. I found 3 separate numbers - closest to the center of the tractor is 6D200, then D256, then 33-110. I didn't have a chance to clean them up real well with the time I had. From a bit of looking around a 3000 should have a C, not a D...
  14. H

    New 3000 Diesel Owner - Questions

    I was recently given what appears to be a really nice 1960's 3000 diesel. I haven't checked the serial number yet but it has the early style grill on it. Prior owner had it garage kept and had repainted it years ago. It has a factory Ford snow plow on it and I was told he pushed snow with it...
  15. H

    4240 with HFWD - Good or bad?

    I came across a 4240 that has been sitting in a barn for about 10 years and am looking at buying it. The tractor runs and has the HFWD. I believe it has been not maintained well as the farm it is at is rented out by heirs and is farmed by renters. I know the tractor starts and runs with...
  16. H

    Can you switch a starter from 6 to 12 volt? JD 40

    My JD 40U starter is on its way out. I have to tap it with a hammer to get it to spin. The tractor was converted from 6 volt to 12 volt with an alternator before I owned it. Can you change the starter to run on 12 volts instead of 6? I feel like running the starter likely for years at 12...
  17. H

    Cub 22 mower

    Does anyone have a source for Cub 22 sickle bar mower pins that attach the cutting bar to the mower frame? A part number or general place to start would be much appreciated. I have two mis-matched pins and both have wear.
  18. H

    1010RS Running Rough - Update

    I had responded a few weeks ago I had gotten my 1010 RS Gas running better after much work. Well it started running like garbage again. Same symptoms - won't idle up, sometimes would backfire and would want to stall. What I have learned is timing the tractor based on the service manual with a...
  19. H

    1010 RS Gas Running Rough - Still

    Ok I am back on my 1010RS gas running rough. I have posted about this before. I recently had the carb rebuilt thinking that had to be the issue. I have good fuel to and through the carb. I have the carb set per the owners manual. I have hot blue spark at the points and to each spark plug...
  20. H

    Cub Gas Tank Outlet Problem - Update

    Spent some time on this over the weekend. I gently chased the threads in the tank and on the fuel bowl with a tap and die. The threads in the tank had already been chased and did not have any taper left. They also had some crud in them. Cleaned everything up good. My local auto parts guy...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top