I am setting up a parts washer (20 gallon tank but requires 12.5 gallons of solvent). I read on the internet of many people
installing a simple remote automotive oil filter at the pump the discharge port and thinking they really have something. But
others who say it will make little or no difference and will actually stress the pump leading to early failure. For sure,
draining the tank occasionally and discarding the last half inch is still in order. Pump intake is 1+ inches above bottom of
tank. Solvent is Naphtha based Crown PSC 1000 at about $9.00/gallon. I appreciate any advice on this matter.
Thank you,
Glenn F.
installing a simple remote automotive oil filter at the pump the discharge port and thinking they really have something. But
others who say it will make little or no difference and will actually stress the pump leading to early failure. For sure,
draining the tank occasionally and discarding the last half inch is still in order. Pump intake is 1+ inches above bottom of
tank. Solvent is Naphtha based Crown PSC 1000 at about $9.00/gallon. I appreciate any advice on this matter.
Thank you,
Glenn F.