Yesterday's Tractor Co. Parts for Farm Tractors - Compare our Prices!
Click Here or call 800-853-2651 
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

350 utility HYDRA- TOUCH SYSTEM


 
Post new topic    
View previous topic :: View next topic  
Author Message
DAN S
Guest






Report to Moderator

PostPosted: Fri Jun 20, 2008 8:50 am    Post subject: 350 utility HYDRA- TOUCH SYSTEM Reply to specific post Reply with quote

I BOUGHT AN INTERNATIONAL 350 UTILITY A FEW MONTHS AGO, I CHANGED THE OIL IN HYDRA-TOUCH SYSTEM, PREVIOUS OWNER HAD AW32 IN SYSTEM. I REPLACED IT WITH HI TRAN OIL, NO PRESSURE TO POWER STEERING OR 2 POINT OR REMOTES. DRAINED SYSTEM AND TOOK TOP OFF OF THE TANK TO CLEAN SCREEN, NO SCREEN, THERE IS AN IN LINE CHARLYNN SCREEN IN THE SUCTION LINE, I ALSO CLEANED THAT. PUMP WILL PUMP OIL BUT NOT PRESSURE, CAN ANYONE HELP ?
THANKS
DAN S
 
Back to top
Homard
Regular


Joined: 11 Apr 2006
Posts: 25


Report to Moderator

PostPosted: Fri Jun 20, 2008 10:31 am    Post subject: Re: 350 utility HYDRA- TOUCH SYSTEM Reply to specific post Reply with quote

Before you changed to Hytran, did the hydraulic system work?

If I understand correctly, there is fluid flowing through the system (can bleed it out of the taps), it just will not building pressure. It sounds like something is wrong with your safety valve-pressure regulator (stuck open, blown O-ring).

Was the system recently put under a lot of stress (tried to pick up something VERY heavy)?
 
Back to top
View user's profile
DAN STIREWALT
New User


Joined: 29 Apr 2008
Posts: 15


Report to Moderator

PostPosted: Fri Jun 20, 2008 11:36 am    Post subject: Re: 350 utility HYDRA- TOUCH SYSTEM Reply to specific post Reply with quote

I ONLY USE THE 2 POINT TO TOW 4 WHEEL HAY TRAILER WITH, DO NOT USE THE REMOTES AT ALL ONLY USE THE POWER STEERING,IS THERE A SPECIAL WAY TO BLEED THE AIR OUT ?
WAS WORKING BEFOR I DRAINED THE SYSTEM AND REFILLED WITH HIGH-TRAN FLUID
DAN S
 
Back to top
View user's profile
Dellbertt2
Guest






Report to Moderator

PostPosted: Fri Jun 20, 2008 2:06 pm    Post subject: Re: 350 utility HYDRA- TOUCH SYSTEM Reply to specific post Reply with quote

turn the steering wheel full left and right to stop at least 5 times that should do it.
replaceing the resevoir screen with and inline depends on where its placed.
 
Back to top
DAN STIREWALT
New User


Joined: 29 Apr 2008
Posts: 15


Report to Moderator

PostPosted: Fri Jun 20, 2008 2:40 pm    Post subject: Re: 350 utility HYDRA- TOUCH SYSTEM Reply to specific post Reply with quote

TRIED THAT, SCREEN IS IN MIDDLE OF SUCTION LINE

DAN S
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Farmall & International Harvester (IHC) All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
TRACTOR   PARTS TRACTOR   MANUALS
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F).  Expedited shipping available, just call!  Most prices for parts and manuals are below our competitors.  Compare our super low shipping rates!  We have the parts you need to repair your tractor.  We are a Company you can trust and have generous return policies!   Shop Online Today or call our friendly sales staff toll free (800) 853-2651.

YT Home  |  Forums Home

Copyright © 1997-2014 Yesterday's Tractor Co.

Powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters