Yesterday's Tractor Co. Parts for Farm Tractors - Compare our Prices!
Click Here or call 800-853-2651 
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

SIMMS injection pump adjustment

Goto page 1, 2  Next
 
Post new topic    
View previous topic :: View next topic  
Author Message
FlorianK.
New User


Joined: 18 Aug 2009
Posts: 7


Report to Moderator

PostPosted: Tue Aug 18, 2009 4:17 am    Post subject: SIMMS injection pump adjustment Reply to specific post Reply with quote

Hello to all, I changed the SIMMS injection pump on my Super Major, model year 1963. After changing the pump the engine had low rpm. Does anybody know how to increase the fuel flow. Which is the right screw for giving the engine more fuel in order to reach the neccessary rpm. For your information, there are two hexagon screws fittet in vertical position on the left hand side of the pump and both are secured with a nut and a locking wire. But I could find another screw (slotted screw) also secured with a nut located close to the left of outcomming 4ea fuel pipes.
Thank you in advance for your help and maybe sorry for writing in an incorrect English language, because I am from Germany an found this good forum - thank goodness - via the internet.
Regards
Florian
 
Back to top
View user's profile
woodache
Regular


Joined: 26 Feb 2006
Posts: 199


Report to Moderator

PostPosted: Tue Aug 18, 2009 7:44 am    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Try here there is a lot of fordson info on this link

http://www.fordsontractorpages.nl/phpbb2/index.php
Fordson pages

 
Back to top
View user's profile
Mike Farmer
Long Time User


Joined: 13 Sep 2007
Posts: 897


Report to Moderator

PostPosted: Tue Aug 18, 2009 11:22 pm    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Hi before trying any adjustments check that the pump type and #no is identical (same part No etc)Because if they are not you may have to reset the basic timing first to get it right. MTF
 
Back to top
View user's profile
FlorianK.
New User


Joined: 18 Aug 2009
Posts: 7


Report to Moderator

PostPosted: Tue Aug 18, 2009 11:42 pm    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Hi Mike Farmer, the new injection pump is exactly the same as the old one which was fittet on a FSM 1963 also. So the timing is correct. But the only difference was that the fitted pump had been reduced in fuel flow in order to have less power. This had been done in order to get a cheaper insurance rate here in Germany. So I am going to find the original adjustment. But how? Do you know which is the right screw for the fuel flow adjustment to reach the original rpm? Thank you in advance for your help. By the way, is it neccessary for you to give you the number of the pump or to post a picture of it?
 
Back to top
View user's profile
Bendee
Tractor Guru


Joined: 30 Oct 2007
Posts: 4321


Report to Moderator

PostPosted: Wed Aug 19, 2009 4:23 am    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

it's set with instruments on the bench,
 
Back to top
View user's profile
Mike Farmer
Long Time User


Joined: 13 Sep 2007
Posts: 897


Report to Moderator

PostPosted: Wed Aug 19, 2009 12:00 pm    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Guten Abend Florian K Wie geht es einen. In the next couple of days I will send you a copy of the fuel pump pages in the fordson manual. However as Bendee says these are set with specialised equiptment on a test bench. MTF
 
Back to top
View user's profile
Mike Farmer
Long Time User


Joined: 13 Sep 2007
Posts: 897


Report to Moderator

PostPosted: Thu Aug 20, 2009 12:45 am    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Hi I have just rechecked the manual. What is the engine No of your tractor. Does it have a vacuum controlled governor or is the pump a Minimec?
If it is the vacuum type ensure that the stop control goes absolutely fully forward. If so try adjust the fast running screw at the air intake manifold. If it is minimec pump the adjuster is on the engine side BUT really should only be adjusted by a qualified engineer although if you are very careful its possible to do it. Does your machine have a rev counter. MTF
 
Back to top
View user's profile
FlorianK.
New User


Joined: 18 Aug 2009
Posts: 7


Report to Moderator

PostPosted: Thu Aug 20, 2009 12:56 am    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Hi Mike Farmer,
thank you for your quick response. I do not know what kind of pump it is (vacuum type or minimec). I will post a picture and all numbers you need asap. By the way, your German seems to be not very bad.
Best Regards
Florian
 
Back to top
View user's profile
FlorianK.
New User


Joined: 18 Aug 2009
Posts: 7


Report to Moderator

PostPosted: Thu Aug 20, 2009 11:11 pm    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote



Hello Mike Farmer, here you will find a pic of my Fuel injection pump. Could you identify now what kind it is (SIMMS or Minimec)? The no of the pump is SPE4A75S515 and engine No is 1609702 (engraving on the engine block). There is another No below the engraved one: E1ADDN6015. Is it possible to tell me how to adjust the fuel flow to increase the rpm and what is the function of these three screws I marked. Thank you for your answer.
P.S. Do not be confused about all the control rods, because I retrofitted a gas pedal and a dual funcion control rod for pushing the cold start button and to stop the engine whith the same rod.
Regards
Florian
 


Last edited by FlorianK. on Thu Aug 20, 2009 11:17 pm; edited 1 time in total
Back to top
View user's profile
Mike Farmer
Long Time User


Joined: 13 Sep 2007
Posts: 897


Report to Moderator

PostPosted: Fri Aug 21, 2009 3:18 am    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Hi Florian. Your engine No comes up as July 1961. I can't identify that pump because I have never seen one like it on any Major. The pump No does not relate to any information that I have. My book says they were fitted with No'sSPE 4A 498 or 527 or 647 I cant find anything giving 515. Sorry I really can't be of more assistance, but please dont hesitate to ask MTF
 
Back to top
View user's profile
FlorianK.
New User


Joined: 18 Aug 2009
Posts: 7


Report to Moderator

PostPosted: Fri Aug 21, 2009 3:47 am    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Hi Mike Farmer, thanks a lot for the research you have done. It seems that I have something special fitted on my Major. I have also done some research in the web (Google) and I couldn't find anything about the pump with No SPE4A75S515. But if someone else could tell me some details about this pump, please do not hesitate to post a message.
Again thanks for your support.
Best regards
Florian
 
Back to top
View user's profile
kiwi kev
New User


Joined: 10 Jan 2005
Posts: 9
Location: Norfolk Island, SOUTH PACIFIC

Report to Moderator

PostPosted: Sun Aug 23, 2009 11:41 am    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Forian
That injector pump is a mechanical type, not a vacumn type.
It is usually fitted to industrial engines.
The 2x screws on the left are low rpm and high rpm. can't remember which is which though. These will only increase or decrease rpm's, not increase the amount of fuel that the engine receives per injection.
Hope this helps.
Kiwi Kev
 
Back to top
View user's profile
Brian Allen
Tractor Expert


Joined: 16 Jan 2008
Posts: 1926
Location: Durham, Ontario, Canada

Report to Moderator

PostPosted: Sun Aug 23, 2009 12:58 pm    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

FlorianK
You could unlock one adjustment and turn it half a flat, then lock it back up and see what changes it made. If not satisfactory put it back to the original position and then try the other adjustment.
This procedure, if followed correctly; will allow you to return to the original settings; if it fails to resolve your issue.
Post back
Brian
 
Back to top
View user's profile AIM Address Yahoo Messenger
FlorianK.
New User


Joined: 18 Aug 2009
Posts: 7


Report to Moderator

PostPosted: Sun Aug 23, 2009 10:32 pm    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Hi Brian Allen,
Hi kiwi kev,
Thank you for your answers. I will try to make some tests with different adjustments on these 2x screws. I will let you know the result as soon as possible.
Best regards
Florian
 
Back to top
View user's profile
FlorianK.
New User


Joined: 18 Aug 2009
Posts: 7


Report to Moderator

PostPosted: Tue Aug 25, 2009 9:01 pm    Post subject: Re: SIMMS injection pump adjustment Reply to specific post Reply with quote

Hi Brian Allen,
Yesterday I made some adjustments on the both screws on the left hand side. I could adjust the rpm successfully. For your information, the lower hexagon screw was the right one to adjust the maximum rpm level. Thank you for any tip you gave.
Best Regards
Florian
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Fordson All times are GMT - 8 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
TRACTOR   PARTS TRACTOR   MANUALS
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F).  Expedited shipping available, just call!  Most prices for parts and manuals are below our competitors.  Compare our super low shipping rates!  We have the parts you need to repair your tractor.  We are a Company you can trust and have generous return policies!   Shop Online Today or call our friendly sales staff toll free (800) 853-2651.

YT Home  |  Forums Home

Copyright © 1997-2014 Yesterday's Tractor Co.

Powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters