Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Fluid in G transaxle


 
Post new topic    
View previous topic :: View next topic  
Author Message
leon
Tractor Expert


Joined: 12 Feb 1998
Posts: 2445


Report to Moderator

PostPosted: Sat Aug 12, 2017 4:36 pm    Post subject: Fluid in G transaxle Reply to specific post Reply with quote


I can't remember what I put in the G's transaxle and can't find recommended weight in any of the manuals. It has no hydraulics. I need to add after a repair job. Please help me out.
 
Back to top
View user's profile
JoeM(GA)
Long Time User


Joined: 31 Aug 2007
Posts: 1291


Report to Moderator

PostPosted: Sat Aug 12, 2017 6:23 pm    Post subject: Re: Fluid in G transaxle Reply to specific post Reply with quote

Leon, with no hydraulics I run 90 at gear oil
 
Back to top
View user's profile
K-Mo
Regular


Joined: 20 Sep 2014
Posts: 219


Report to Moderator

PostPosted: Sun Aug 13, 2017 2:36 am    Post subject: Re: Fluid in G transaxle Reply to specific post Reply with quote

8 quarts SAE 20W.
I have just worked on two clutch housing assemblies and seemed like excessive wear on gears and bearings. These parts depend on the oil slinger for lubrication. I wonder if the oil slinger works better with thinner oil.
 
Back to top
View user's profile
alliumdream
New User


Joined: 24 Jun 2017
Posts: 7
Location: Hadley, Massachusetts

Report to Moderator

PostPosted: Thu Sep 07, 2017 8:11 am    Post subject: Re: Fluid in G transaxle Reply to specific post Reply with quote


In both of my G's, one had a hydraulic pump, the other does not, I put "303 Hydraulic Oil".

Owners manual for AC G says: 20W is for the engine for which they normally recommend 30W (nondetergent)

90W for the transmission/differential case. But I've been using the 303 hydraulic oil from TSC, don't know if that is good or bad.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Allis Chalmers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters