Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Buda Engine.


 
Post new topic    
View previous topic :: View next topic  
Author Message
Deeredriver2520
Regular


Joined: 06 Oct 2016
Posts: 37


Report to Moderator

PostPosted: Sat Aug 12, 2017 1:31 pm    Post subject: Buda Engine. Reply to specific post Reply with quote

Can you still get parts for a 6 cylinder Buda Engine?
Was there different gas engines for the Co-Op 4 and the cockshutt 40?
 
Back to top
View user's profile
Gary H.
Regular


Joined: 11 Jul 2007
Posts: 264


Report to Moderator

PostPosted: Sat Aug 12, 2017 2:34 pm    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

E4 and 40 is the same. All depends what engine parts you need.
 
Back to top
View user's profile
Deeredriver2520
Regular


Joined: 06 Oct 2016
Posts: 37


Report to Moderator

PostPosted: Sat Aug 12, 2017 2:40 pm    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

I want to rebuild a 6 cylinder Buda engine. Bore it out. Is there parts and piston available for these engines.
 
Back to top
View user's profile
J. Schwiebert
Tractor Expert


Joined: 27 Sep 2013
Posts: 3379


Report to Moderator

PostPosted: Sat Aug 12, 2017 3:48 pm    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

About everybody in the aftermarket made over bore kits for those engines. Have you looked up in part numbers Those are wet sleeve engines. How much money do you want to put into this project. Have you done your homework on the B series Buda engines? Have you thought about a crank and sleeves and pistons for a 262 A-C?
 
Back to top
View user's profile
Deeredriver2520
Regular


Joined: 06 Oct 2016
Posts: 37


Report to Moderator

PostPosted: Sat Aug 12, 2017 4:08 pm    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

Looking for a project for my 10 year old son and I to do together. Found a Cockhutt 40 with a broken Rod. Trying to determine if this is something that we should get into. I've done many JD two cylinders. Always liked Cockshutts. Trying to pick the brains of you all that have been around Cockshutts.
 
Back to top
View user's profile
leroy in ne
Regular


Joined: 02 Sep 2014
Posts: 269


Report to Moderator

PostPosted: Sat Aug 12, 2017 6:02 pm    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

by memory don't have books available. some internal parts are the same between the 4 cyl. 4B153 engine used in the 30/E3 tractors and the 6B230 used in the 40/E4. items like valve train components, connecting rods, sleeves and pistons, the only difference being in the number used. this may make it easier when trying to find used parts when new isn't avail. as many more items including fork lifts and other industrial engines are out there including in some gleaner combines
 
Back to top
View user's profile
Traditional Farmer
Tractor Guru


Joined: 26 Apr 2007
Posts: 10175


Report to Moderator

PostPosted: Sat Aug 12, 2017 6:26 pm    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

Better check for parts availability,I know that the 262 gas is almost impossible to find engine kits and if you do it'll be real expensive.You could always try to find a gas 262
that's running out of a combine to put into the 40.I have done that a couple times.
 
Back to top
View user's profile
Gambles
Tractor Expert


Joined: 25 Mar 2012
Posts: 1623


Report to Moderator

PostPosted: Sun Aug 13, 2017 5:04 am    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

Parts are available if you don't mind giving your suppliers a signed, blank check. Talk to your machine shop (preferably an old geezer who has heard about the Buda brand) about how easy is for them to get parts and how much it costs to have the valves ground. Then talk to them about costs involving the crankshaft ground. Do a call out to Irv B. and Phil H. on this site and try to talk to them in person. This is not a brand to rebuild if you are in a hurry because it's possible a supplier won't return your call for several weeks. If you are still serious about this project, remember that you could easily spend $3K on a rebuilt tractor and have a hard time getting $2K out of it in the end should you decide to sell.
One advantage to your project is that you'll end up with a tractor that hasn't ever been seen by a lot of people and it won't be a cookie-cutter tractor, unlike a few other brands.
 
Back to top
View user's profile
Dave Morlock
New User


Joined: 20 Oct 2013
Posts: 16
Location: Wadesville, In

Report to Moderator

PostPosted: Sun Aug 13, 2017 6:45 am    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

CVPost-deeredriver2520 wrote:
(quoted from post at 23:40:55 08/12/17) I want to rebuild a 6 cylinder Buda engine. Bore it out. Is there parts and piston available for these engines.

Parts are available (Phil Heisey) has most everything. When you remove and replace sleeves, take the time (extra time) to clean inside bore hole. Remove rust very well and clean the seat grooves super extra clean, or you can (will) have leakage.
Once you are complete, the tractor will run and sounds awesome. The 40's have a sound all their own.
Dave
 
Back to top
View user's profile
P Heisey Harleysville,PA
Regular


Joined: 21 Sep 2009
Posts: 164


Report to Moderator

PostPosted: Sun Aug 13, 2017 7:20 am    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

Hi deeredriver2520,

We have all the engine rebuild parts on stock here for your BUDA 6B230 project in your COCKSHUTT 40 gas tractor. We also have many nore parts on stock for the rest of your tractor too.

Call, email, or fax to me.
Phil Heisey
215-256-8651
FAX 215-256-1203
 
Back to top
View user's profile
P Heisey Harleysville,PA
Regular


Joined: 21 Sep 2009
Posts: 164


Report to Moderator

PostPosted: Sun Aug 13, 2017 7:22 am    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

Hi Dave,

Thank You for posting me as a source for BUDA and COCKSHUTT parts!!

Phil
 
Back to top
View user's profile
P Heisey Harleysville,PA
Regular


Joined: 21 Sep 2009
Posts: 164


Report to Moderator

PostPosted: Sun Aug 13, 2017 7:30 am    Post subject: Re: Buda Engine. Reply to specific post Reply with quote

Hi Gambles,

Thanks for posting me as a contact and source for BUDA and COCKSHUTT parts.

Phil Heisey
215-256-8651
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Oliver, Cletrac, Coop and Cockshutt All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters