Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

White 4-210 steering pins


 
Post new topic    
View previous topic :: View next topic  
Author Message
muleman51
Regular


Joined: 08 Dec 2007
Posts: 38


Report to Moderator

PostPosted: Mon Nov 27, 2017 8:36 pm    Post subject: White 4-210 steering pins Reply to specific post Reply with quote

The seals are out of one of the steering cylinders, bad enough that it leaves a trail. We have the seals but can't get the pins out on the ends, we will probably need to cut them out but ther are no pin available. We did a dealer search also and came up blank. Any ideas what to do. We have thought of just using a large bolt and bushings. we don't use it on the road much so it would be just chasing it down the field. Any ideas would be appreciated. Jim
 
Back to top
View user's profile
johns
Long Time User


Joined: 09 Oct 2008
Posts: 908


Report to Moderator

PostPosted: Tue Nov 28, 2017 8:44 pm    Post subject: Re: White 4-210 steering pins Reply to specific post Reply with quote

Not sure if they are the same but try going to a JD dealer and see if they have pins for an 8640 JD. In my former days as a partsman I think I had a customer with a Steiger and the pins were the same.
 
Back to top
View user's profile
IanC
Long Time User


Joined: 19 Sep 2002
Posts: 1073


Report to Moderator

PostPosted: Tue Nov 28, 2017 8:53 pm    Post subject: Re: White 4-210 steering pins Reply to specific post Reply with quote

If I remember correctly the pins are tapered where they fit into the "W" steering arm. Larger at the bottom, so pins go "down". Check with the techs at Maibach in Creston OH, but I think our guys heated the "w" member then gave it a good whack near the pin boss kind of like you do with tie rod ends. Left the dealer in '91 so some stuff the wasn't every day is getting fuzzy.
 
Back to top
View user's profile
GM Guy
Regular


Joined: 09 Mar 2016
Posts: 55


Report to Moderator

PostPosted: Mon Dec 04, 2017 9:55 pm    Post subject: Re: White 4-210 steering pins Reply to specific post Reply with quote

Soak it in Kroil from Kano Labs.

Give it time to soak, and possibly heat it with a torch, re-apply, and let it sit.

take your time, only one chance to get it right!
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Oliver, Cletrac, Coop and Cockshutt All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters