Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

3020 starter solenoid

Goto page Previous  1, 2

 
Post new topic    
View previous topic :: View next topic  
Author Message
JDEM
Long Time User


Joined: 18 Mar 2016
Posts: 1219


Report to Moderator

PostPosted: Mon Dec 04, 2017 6:41 pm    Post subject: Re: 3020 starter solenoid Reply to specific post Reply with quote

Could be but post a photo here so we know exactly what you are seeing. Does it look like the relay I posted?
 
Back to top
View user's profile
SVcummins
Long Time User


Joined: 06 Feb 2017
Posts: 553


Report to Moderator

PostPosted: Mon Dec 04, 2017 8:13 pm    Post subject: Re: 3020 starter solenoid Reply to specific post Reply with quote

I?ve used a 1/4 inch 9/16 socket with a swivel and long extension to get the hind bolt out
 
Back to top
View user's profile
Randy G
Long Time User


Joined: 31 Oct 2008
Posts: 624


Report to Moderator

PostPosted: Mon Dec 04, 2017 9:06 pm    Post subject: Re: 3020 starter solenoid Reply to specific post Reply with quote

I also had the same problem w/my 2940. Turn the key, some times start, sometimes clicking only. Installed the kit TX Jim mentioned and the problem was fixed. Not enough voltage was getting to the starter but the kit gives 12v directly to the starter w/o affecting the safety switch.
 
Back to top
View user's profile
Tx Jim
Tractor Guru


Joined: 14 Feb 1999
Posts: 24428


Report to Moderator

PostPosted: Tue Dec 05, 2017 3:02 am    Post subject: Re: 3020 starter solenoid Reply to specific post Reply with quote

CVPost-sandel wrote:
(quoted from post at 18:12:54 12/04/17) Is the starter relay you reference the one in the picture? If so is it the device located in a little box like enclosure directly above the back end of the starter?


If relay was factory installed will depend on tractor serial number but yes 3020's after SN 123,000 had starter relay on firewall above starter.
 
Back to top
View user's profile
sandel
Regular


Joined: 13 Jun 2015
Posts: 80


Report to Moderator

PostPosted: Tue Dec 05, 2017 3:50 am    Post subject: Re: 3020 starter solenoid Reply to specific post Reply with quote

Thanks to all of you. Appreciate the input.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> John Deere All times are GMT - 8 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters