Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

1964 John Deere 2010 leaking hydraulic fluid


 
Post new topic    
View previous topic :: View next topic  
Author Message
Dan herbeck
New User


Joined: 07 Dec 2017
Posts: 3


Report to Moderator

PostPosted: Thu Dec 07, 2017 12:28 pm    Post subject: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote

Just bought a 1964 John Deere 2010 Started it up and engaged PTO to warm up After about 30 seconds it started leaking hydraulic fluid from whats looks like the inspection ports for clutch Can I still run it without turning on PTO to move it and what possibly could be wrong
 
Back to top
View user's profile
SodBuster87
Regular


Joined: 23 Feb 2017
Posts: 449
Location: Pine River, Minn.

Report to Moderator

PostPosted: Thu Dec 07, 2017 1:28 pm    Post subject: Re: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote

Oh yes John Deere's not so favorite child. Not sure if its the right answer but on my 2010 I just stocked up on hytrans and accepted thats how it was. After what the shop wanted just to diagnose it I sent it down river. Somebody wanted the engine for something only thing good about that tractor. Sorry I'm not very helpfull. Sod Buster.
 
Back to top
View user's profile
tim s
Tractor Guru


Joined: 01 Nov 2008
Posts: 12005
Location: Somerset Ohio

Report to Moderator

PostPosted: Thu Dec 07, 2017 5:31 pm    Post subject: Re: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote

The pto is manual on a 2010, the oil is from some where else
 
Back to top
View user's profile
buickanddeere
Tractor Guru


Joined: 31 May 2003
Posts: 31924
Location: in front of computer

Report to Moderator

PostPosted: Thu Dec 07, 2017 8:34 pm    Post subject: Re: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote


Wish that you had asked here or on the JD forum of this site about the 2010 prior to purchase.
While I bleed JD green, I have to admit that the 2010 is the most sorry piece of chit ever built by Deere. Sell it now before it drags you down deeper.
 
Back to top
View user's profile
Tx Jim
Tractor Guru


Joined: 14 Feb 1999
Posts: 25054


Report to Moderator

PostPosted: Fri Dec 08, 2017 3:03 am    Post subject: Re: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote


Hyd oil leak could be failed seal on frt of trans on pto drive shaft or possibly hyd pump drive shaft. Hyd pump can be disengaged by moving lever(key 28) down.


 
Back to top
View user's profile
Bret4207
Tractor Guru


Joined: 15 Jan 2005
Posts: 9981
Location: St Lawrence Valley, Northern NY

Report to Moderator

PostPosted: Fri Dec 08, 2017 5:26 am    Post subject: Re: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote


As with any other model of JD or any other brand tractor, it could be a seal or a number of other things. They can all develop leaks over the years and need repair. You're going to have to start trouble shooting the issue or get it to someone who can.
 
Back to top
View user's profile
Jo Bird
Long Time User


Joined: 27 Apr 2012
Posts: 939
Location: NY Southern Tier

Report to Moderator

PostPosted: Fri Dec 08, 2017 7:36 am    Post subject: Re: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote

Remove the plate on the bottom of the housing and look up in with a flash-lite. Maybe the hdy pump or the transmission seal. From the round hole on the Rt side you can see the line up to the valve for the rear hdy.
 
Back to top
View user's profile
Dan herbeck
New User


Joined: 07 Dec 2017
Posts: 3


Report to Moderator

PostPosted: Wed Dec 20, 2017 2:16 pm    Post subject: Re: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote

after removing the inspection plate and draining the hydraulic fluid out i started tractor to see where the fluid was coming from and seems to be from behind the internal pump. Could it be the pump itself or the line for power steering. What is the likely of the two.
 
Back to top
View user's profile
Jo Bird
Long Time User


Joined: 27 Apr 2012
Posts: 939
Location: NY Southern Tier

Report to Moderator

PostPosted: Thu Dec 21, 2017 6:09 am    Post subject: Re: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote

You need to do more to isolate where the leak is coming from anything from above will run down the front of the transmission. The leak could be from the steering box above, the remote control valve above, the priority valve or possibly an O ring that seals the pump to the front of the transmission. Clean up the top and front of the transmission area, put oil back in, start it up and narrow down the location of the leak. Just saying theirs no good at guessing where it is leaking from. I've had leaks in all of the areas, let me know if it is the pump, no need to split the tractor to get it out if that is the problem.
 
Back to top
View user's profile
Dan herbeck
New User


Joined: 07 Dec 2017
Posts: 3


Report to Moderator

PostPosted: Thu Dec 21, 2017 7:04 am    Post subject: Re: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote

How can I isolate the leak from the inspection plate. I have it completely cleaned up in there Also have a inspection camera but once I started the tractor Im afraid to put the camera in because of the moving parts
 
Back to top
View user's profile
Jo Bird
Long Time User


Joined: 27 Apr 2012
Posts: 939
Location: NY Southern Tier

Report to Moderator

PostPosted: Thu Dec 21, 2017 8:02 am    Post subject: Re: 1964 John Deere 2010 leaking hydraulic fluid Reply to specific post Reply with quote

Dan herbeck wrote:
(quoted from post at 16:04:18 12/21/17) How can I isolate the leak from the inspection plate. I have it completely cleaned up in there Also have a inspection camera but once I started the tractor Im afraid to put the camera in because of the moving parts
With a good flash lite you should be able to see where the leak is coming from. For checking the higher areas look under the dash for power steering / remote control valve issues and into the round hole on the Rt side of the bell housing at the pipe to the power steering and the divert-er valve below that. Any thing lower than that is most likely an O ring on/ in the pump which you should be able to see from the bottom or the gasket between the transmission and the front cover of the transmission.
PS, just happen to think of this, any leak from the rear main seal of the engine will also show up in that area as well..
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Tractor Talk All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters