Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Fleetline sealed beams


 
Post new topic    
View previous topic :: View next topic  
Author Message
Jared Chaddock
Regular


Joined: 15 Aug 2001
Posts: 158


Report to Moderator

PostPosted: Sun Dec 03, 2017 3:58 pm    Post subject: Fleetline sealed beams Reply to specific post Reply with quote

A while back I cleaned up some 5 3/4" Guide light buckets off of a fleetline to use on my 77. I didnt realize they were for a sealed beam bulb and are different from the type with a reflector and small bulb. My question is, where can I get sealed beams to fit? I bought some from NAPA (floodlight type I guess you would call) but they didnt fit. Close but different. Anyone have a part number that will work? Thanks in advance!
 
Back to top
View user's profile
brutus49DC
Long Time User


Joined: 19 Nov 2015
Posts: 1155


Report to Moderator

PostPosted: Thu Dec 07, 2017 6:04 pm    Post subject: Re: Fleetline sealed beams Reply to specific post Reply with quote

On a Case 400 I replaced the the bulb and reflector unit (which didn't have a replaceable bulb) with a sealed beam. I put a bead of silicone around the shell and set the beam onto it. After it cured I tightened the ring. I don't remember the sealed beam number that I used right off hand.
 
Back to top
View user's profile
Keeler
New User


Joined: 05 Mar 2009
Posts: 3


Report to Moderator

PostPosted: Sun Dec 10, 2017 2:33 pm    Post subject: Re: Fleetline sealed beams Reply to specific post Reply with quote

CVPost-Jared Chaddock wrote:
(quoted from post at 00:58:36 12/04/17) A while back I cleaned up some 5 3/4" Guide light buckets off of a fleetline to use on my 77. I didnt realize they were for a sealed beam bulb and are different from the type with a reflector and small bulb. My question is, where can I get sealed beams to fit? I bought some from NAPA (floodlight type I guess you would call) but they didnt fit. Close but different. Anyone have a part number that will work? Thanks in advance!


Several years ago I got sealed beams from my local Agco dealer. He found one that was used on a combine. Was 102213A. Worked in my old shells that originally had the reflector with separate bulb. I have a 88 diesel, so these are 12 volt.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Oliver, Cletrac, Coop and Cockshutt All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters