Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

8N with bucket Hood removal


 
Post new topic    
View previous topic :: View next topic  
Author Message
musicmanjer
New User


Joined: 01 Jan 2018
Posts: 4


Report to Moderator

PostPosted: Mon Jan 01, 2018 7:50 pm    Post subject: 8N with bucket Hood removal Reply to specific post Reply with quote

Hi all,

Im a newbie here and need a bit of help.

My wife got her dad's 1948 8N and I've done a lot of work to it to try to get it running like new H20 pump, wires, plugs, carburetor, etc. I went to fill the radiator to start it, and coolant all drained out of it.

I purchased a new radiator for it but cannot figure out how to remove the hood, and the hydraulic pump shaft off the front of the engine is going through the grill, so not sure where to start. It has the bucket attachment so not a lot of access to the hood.

Can the hood be removed without the grill, and how is the hood unbolted ? I assume it comes up and off the tractor?

Any help would be greatly appreciated!
Happy New Year all Smile
 
Back to top
View user's profile
Lester Isby
Regular


Joined: 24 Nov 2016
Posts: 92


Report to Moderator

PostPosted: Mon Jan 01, 2018 8:51 pm    Post subject: Re: 8N with bucket Hood removal Reply to specific post Reply with quote

Need to know what kind of loader it is, My has a Wagner. If it's like mine take the loader off first much easier. As
far as the pump shaft it's splined to the crankshaft pully. Take the mounting bolts for the pump out,then unbolt the
coupling haves.I put a vise grips on the shaft and tap the vice grips with a hammer forword should slide out of the
pulley.
 
Back to top
View user's profile
Roger in Iowa
Tractor Expert


Joined: 12 Oct 2007
Posts: 2674
Location: Ottumwa, Iowa

Report to Moderator

PostPosted: Tue Jan 02, 2018 2:47 pm    Post subject: Re: 8N with bucket Hood removal Reply to specific post Reply with quote

Pump shaft may not be spined, but have a screwed on coupling with dowels that go into the crankshaft pully. It has left hand threads. Unscrew the shaft from the coupling and remove the shaft going thru the grill.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Ford 9N, 2N, 8N All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters