Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Ferguson TO-30 PTO Shield


 
Post new topic    
View previous topic :: View next topic  
Author Message
tanner7212
Regular


Joined: 24 Feb 2017
Posts: 21


Report to Moderator

PostPosted: Fri Jan 12, 2018 2:59 pm    Post subject: Ferguson TO-30 PTO Shield Reply to specific post Reply with quote

Hi all,

I'm looking for a PTO shield for my TO-30 and cannot seem to find anything. I have the PTO cap which is nice but I'd like to have a shield for when i have the PTO adapter on. Does anyone know where a shield could be bought or have plans to make one? Thanks!
 
Back to top
View user's profile
hymie2lt
Long Time User


Joined: 17 Aug 2008
Posts: 591


Report to Moderator

PostPosted: Fri Jan 12, 2018 5:04 pm    Post subject: Re: Ferguson TO-30 PTO Shield Reply to specific post Reply with quote

Hello
I may be able to find one, but I see that there are two different ones. Get back to me through regular E-mail. Bottom right Classic view.
Wayne
 
Back to top
View user's profile
Kirk-NJ
Tractor Guru


Joined: 10 Dec 2006
Posts: 4564


Report to Moderator

PostPosted: Sat Jan 13, 2018 1:30 am    Post subject: Re: Ferguson TO-30 PTO Shield Reply to specific post Reply with quote

If you don't find one you could possibly make one. I remember
seeing someone had made one out of PVC pipe to go over the ORC.
Wasn't pretty but worked. Try doing a search here or on the
other Ford N tractor site.

Kirk
 
Back to top
View user's profile
Kirk-NJ
Tractor Guru


Joined: 10 Dec 2006
Posts: 4564


Report to Moderator

PostPosted: Sat Jan 13, 2018 4:09 am    Post subject: Re: Ferguson TO-30 PTO Shield Reply to specific post Reply with quote

Found the description but the the photos were photobucket so they are long gone.

Having an ORC (Over Running Clutch) on the PTO shaft for brush hogging adds a good measure of safety. Having that additional length and girth of the ORC down there in the open air spinning at 540
RPM?s with fingers, arms, shoelaces, sleeves and the like in the way is not safe. I posted the question the other day about ORC covers and received a number of great responses including some
ideas for building such a cover from ?Crem? and ?Heybusdriver?. Both of those guys built one out of steel and did a fine job of it. Thanks much guys. Unfortunately, I do not own a welder and
having it done just isn?t as much fun as doing it yourself. I decided to make one out of 4 inch, schedule 40 ABS sewer pipe. There is something poetic about having a chunk of sewer pipe hanging
off the rear of The Beast!
I first made some studs to replace the bolts that hold the limit chain brackets out of 7/16 ? 14 all thread. I used 2 jam nuts to provide a spacer between the limit chain bracket and a 4-inch ABS
?Johnny ring? flange. The flange bolt pattern is very close to the 4-? inch pattern on the limit chain brackets, I just needed to drill out the flange to accept the 7/16 studs. I then glued a
male threaded connector on the Johnny ring and cut a short length of pipe and put a cap on it to allow for easy removal.
Now I can keep the ORC in place while using other implements without the worry that someone can get caught up in it.
 
Back to top
View user's profile
Richard L
Tractor Guru


Joined: 04 Nov 2007
Posts: 3946


Report to Moderator

PostPosted: Sat Jan 13, 2018 10:01 am    Post subject: Re: Ferguson TO-30 PTO Shield Reply to specific post Reply with quote

tanner7212 I found an NOS PTO shield about two months ago. I called my MF dealer and asked for a price. When he told me I told him I guess I will never have a need for that one. He told me the price was $222.78 plus shipping. He then asked me what it was for, I told him and he said he understands why it is still in their inventory. If you want that one send me an email. Richard
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Harry Ferguson All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters