Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Tea20 Footrest bolts


 
Post new topic    
View previous topic :: View next topic  
Author Message
kaesark
Regular


Joined: 15 Nov 2016
Posts: 176


Report to Moderator

PostPosted: Mon Feb 12, 2018 1:44 pm    Post subject: Tea20 Footrest bolts Reply to specific post Reply with quote

Hi
Have discovered that one of the footrest bolts has sheared off at the start of the thread.
Does anyone know how much thread is on the end of the bolt as I would like to try and drill it out. I presume the bolt does not go through the casing completely.
Cheers
 
Back to top
View user's profile
kaesark
Regular


Joined: 15 Nov 2016
Posts: 176


Report to Moderator

PostPosted: Mon Feb 12, 2018 1:48 pm    Post subject: Re: Tea20 Footrest bolts Reply to specific post Reply with quote

Photo

 
Back to top
View user's profile
John Deere D
Tractor Expert


Joined: 14 Jun 2011
Posts: 2302


Report to Moderator

PostPosted: Mon Feb 12, 2018 2:12 pm    Post subject: Re: Tea20 Footrest bolts Reply to specific post Reply with quote

Quote:
Hi
Have discovered that one of the footrest bolts has sheared off at the start of the thread.
Does anyone know how much thread is on the end of the bolt as I would like to try and drill it out. I presume the bolt does not go through the casing completely.
Cheers

I had the same challenge once:

Double NUT STUD and check for depth in blind hole:

I welded a WASHER to the end of the Brocken stud, then welded a NUT to the washer and backed Brocken stud out:

Bob..



 
Back to top
View user's profile
kaesark
Regular


Joined: 15 Nov 2016
Posts: 176


Report to Moderator

PostPosted: Mon Feb 12, 2018 2:17 pm    Post subject: Re: Tea20 Footrest bolts Reply to specific post Reply with quote

Hi
Unfortunately I have nothing to weld to as it has broken off inside the bottom of the hole.
Cheers
 
Back to top
View user's profile
John Deere D
Tractor Expert


Joined: 14 Jun 2011
Posts: 2302


Report to Moderator

PostPosted: Mon Feb 12, 2018 2:20 pm    Post subject: Re: Tea20 Footrest bolts Reply to specific post Reply with quote

Hi.......

Double NUT STUD, (one of the other studs), remove and check for depth in blind hole:


Bob........
 
Back to top
View user's profile
kaesark
Regular


Joined: 15 Nov 2016
Posts: 176


Report to Moderator

PostPosted: Mon Feb 12, 2018 2:25 pm    Post subject: Re: Tea20 Footrest bolts Reply to specific post Reply with quote

Ok got it, hope it doesn't break off too😂

What do you think an easyout
Will remove it.
 
Back to top
View user's profile
John Deere D
Tractor Expert


Joined: 14 Jun 2011
Posts: 2302


Report to Moderator

PostPosted: Mon Feb 12, 2018 2:47 pm    Post subject: Re: Tea20 Footrest bolts Reply to specific post Reply with quote

With the attaching components that hold the radius rods in place removed, is there any Brocken STUD protruding out from the threaded bore?

Bob..

 
Back to top
View user's profile
Steve@Advance
Tractor Guru


Joined: 12 Nov 2013
Posts: 9147


Report to Moderator

PostPosted: Mon Feb 12, 2018 6:21 pm    Post subject: Re: Tea20 Footrest bolts Reply to specific post Reply with quote

Be very careful with the ezout.

It will only work if the bolt is free to turn. If it is bottomed out, rusted, or seized, no the ezout will not work and if broken off in the bolt, the problem is made worse!

If you can score a left handed drill bit, all the better. It just "mite" grab the bolt and spin it out.

Otherwise, make every effort to drill EXACTLY in the middle, and as straight as possible. If it doesn't move, the end result will be to drill the body of the bolt away and surgically tap the remaining threads out.

That is why it is so important to keep it in the center and straight.
 
Back to top
View user's profile
kaesark
Regular


Joined: 15 Nov 2016
Posts: 176


Report to Moderator

PostPosted: Mon Feb 12, 2018 8:29 pm    Post subject: Re: Tea20 Footrest bolts Reply to specific post Reply with quote

Ok I have managed to plug to bolt hole full of wd40 rust penatrant will see what happens tomorrow will go with the left hand drill bit tomorrow after its had a good soak.
 
Back to top
View user's profile
kaesark
Regular


Joined: 15 Nov 2016
Posts: 176


Report to Moderator

PostPosted: Tue Feb 13, 2018 5:36 pm    Post subject: Re: Tea20 Footrest bolts Reply to specific post Reply with quote

Managed to extract what was left of bolt which was only the threaded end.
Fitted new water pump as well ready for painting, then wiring to nut out.
Thanks for all the help.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Harry Ferguson All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters