Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

1080 Massy lift arms


 
Post new topic    
View previous topic :: View next topic  
Author Message
Big DP
New User


Joined: 13 Feb 2018
Posts: 1


Report to Moderator

PostPosted: Tue Feb 13, 2018 8:39 am    Post subject: 1080 Massy lift arms Reply to specific post Reply with quote

My 1080 Massy lift arms on start up come all the way up. I
have manipulated both control and draft arms in all positions
with no luck. I have the right side plate off I can move the
linkage arm back and forth there is no tension on the linkage
in any position with the tractor running. I do have go flow
through the standpipe. What gives?
 
Back to top
View user's profile
Dieseltech
Tractor Guru


Joined: 29 Feb 2012
Posts: 5323
Location: Indiana

Report to Moderator

PostPosted: Tue Feb 13, 2018 9:39 am    Post subject: Re: 1080 Massy lift arms Reply to specific post Reply with quote

Sounds like the inlet spool control valve is stuck. There's an oscillator that constantly rotates the valve slightly to help prevent sticking. If the oscillator drive fails, it WILL stick. If that's the problem the lift cover has to come off, and a rear trans-diff case joint split is needed before the three point pump can be removed out the diff case front.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Restoration and Repair Tips All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters