Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Oliver plow

Goto page 1, 2  Next

 
Post new topic    
View previous topic :: View next topic  
Author Message
sowhatofit
Regular


Joined: 09 May 2018
Posts: 28


Report to Moderator

PostPosted: Wed Jun 13, 2018 5:53 am    Post subject: Oliver plow Reply to specific post Reply with quote

Hello everyone, looking for some help getting this plow I picked up last night functional. First of all it appears to lean to the right -what might cause this (besides the tires of course)? And what size tires should be on this? Right now they appear to be whatever was lying around.

Also with the plows crank turned all the way in, the plows still are pretty far down and drag when pulling. Is there an Adjustment for this?
Identification of model would help too- I'm thinking it's a plowmaster 100?

I appreciate any feedback/advice. Thanks!





 
Back to top
View user's profile
Olliejunkie
Tractor Expert


Joined: 22 May 2016
Posts: 1829
Location: Eugene Oregon

Report to Moderator

PostPosted: Wed Jun 13, 2018 7:24 am    Post subject: Re: Oliver plow Reply to specific post Reply with quote

I'm no expert but I think after you make your first pass the left tire would run in the furrow leveling it out.
 
Back to top
View user's profile
farmerwithmutt
Tractor Guru


Joined: 21 Sep 2013
Posts: 3738
Location: sw wisc

Report to Moderator

PostPosted: Wed Jun 13, 2018 7:40 am    Post subject: Re: Oliver plow Reply to specific post Reply with quote

I think its tripped . In other words trip
again pull forward and it will come up on
that side
 
Back to top
View user's profile
Lee E. Smith
New User


Joined: 13 Jun 2018
Posts: 1


Report to Moderator

PostPosted: Wed Jun 13, 2018 8:06 am    Post subject: Re: Oliver plow Reply to specific post Reply with quote

This Oliver plow model was identified as a "Heavy Duty" plow. The lighter weight plow series were known as the "plowmaster"series.
As a 2-bottom plow, it would be identified as a 2-14 ; 2-16 plow.
 
Back to top
View user's profile
sowhatofit
Regular


Joined: 09 May 2018
Posts: 28


Report to Moderator

PostPosted: Wed Jun 13, 2018 8:14 am    Post subject: Re: Oliver plow Reply to specific post Reply with quote

CVPost-Farmerwithmutt wrote:
(quoted from post at 08:40:32 06/13/1Cool I think its tripped . In other words trip
again pull forward and it will come up on
that side


The trip lever is the lever in the right if you were to look back from the tractor?
 
Back to top
View user's profile
OliverNate
Long Time User


Joined: 16 Apr 2012
Posts: 523


Report to Moderator

PostPosted: Wed Jun 13, 2018 12:59 pm    Post subject: Re: Oliver plow Reply to specific post Reply with quote

Yes, chances are if its been sitting for some time that drive hub will need to be taken apart and cleaned and make sure every thing spins and probly need new
springs. Its been a while since I did mine so I don't remember how it looks in there. But I was able to find off the shelf springs at local farm store that
worked.
 
Back to top
View user's profile
sowhatofit
Regular


Joined: 09 May 2018
Posts: 28


Report to Moderator

PostPosted: Wed Jun 13, 2018 1:17 pm    Post subject: Re: Oliver plow Reply to specific post Reply with quote

CVPost-OliverNate wrote:
(quoted from post at 13:59:57 06/13/1Cool Yes, chances are if its been sitting for some time that drive hub will need to be taken apart and cleaned and make sure every thing spins and probly need new
springs. Its been a while since I did mine so I don't remember how it looks in there. But I was able to find off the shelf springs at local farm store that
worked.


Springs seem to be working, although they are pretty rusty. Never tore apart a hub like that. Any reference materials availabale online?
 
Back to top
View user's profile
Plowman
Regular


Joined: 24 Jan 2010
Posts: 229


Report to Moderator

PostPosted: Thu Jun 14, 2018 2:21 pm    Post subject: Re: Oliver plow Reply to specific post Reply with quote

Hi I have manuals and parts for those plows. Thanks Steve 419-618-0017
 
Back to top
View user's profile
J.Wondergem
Tractor Guru


Joined: 05 Mar 2009
Posts: 5166
Location: Rockford, Mi

Report to Moderator

PostPosted: Sat Jun 16, 2018 2:29 pm    Post subject: Re: Oliver plow Reply to specific post Reply with quote


It's tripped. One of mine looks just like it except for the tail wheel, which is rubber.
 
Back to top
View user's profile
sowhatofit
Regular


Joined: 09 May 2018
Posts: 28


Report to Moderator

PostPosted: Sat Jun 16, 2018 2:49 pm    Post subject: Re: Oliver plow Reply to specific post Reply with quote

J.Wondergem wrote:
(quoted from post at 15:29:38 06/16/1Cool
It's tripped. One of mine looks just like it except for the tail wheel, which is rubber.


I'm guessing this one used to have rubber on it too. Any problems running it without the rubber? Other solutions?
 
Back to top
View user's profile
J.Wondergem
Tractor Guru


Joined: 05 Mar 2009
Posts: 5166
Location: Rockford, Mi

Report to Moderator

PostPosted: Sun Jun 17, 2018 4:20 am    Post subject: Re: Oliver plow Reply to specific post Reply with quote


When I first got it, I had to lube up the lift with oil an free it up. Use the lever on the right to level the plow, an the crank for the depth, when it's in the ground. They plow nice.
 
Back to top
View user's profile
OliverNate
Long Time User


Joined: 16 Apr 2012
Posts: 523


Report to Moderator

PostPosted: Sun Jun 17, 2018 7:12 pm    Post subject: Re: Oliver plow Reply to specific post Reply with quote

That's how some came, I think I have two with front wheels rubber and rear is that steel disc wheel and another two that are spose to be full steel but the front
two where cut off and a rim welded on.
 
Back to top
View user's profile
sowhatofit
Regular


Joined: 09 May 2018
Posts: 28


Report to Moderator

PostPosted: Tue Jun 19, 2018 1:57 pm    Post subject: Re: Oliver plow Reply to specific post Reply with quote

Any idea what size tires should go on it?
 
Back to top
View user's profile
OliverNate
Long Time User


Joined: 16 Apr 2012
Posts: 523


Report to Moderator

PostPosted: Tue Jun 19, 2018 2:17 pm    Post subject: Re: Oliver plow Reply to specific post Reply with quote

I think I took 6.00-16s off on mine but put 6.50-16s on because thats what I had.
 
Back to top
View user's profile
sowhatofit
Regular


Joined: 09 May 2018
Posts: 28


Report to Moderator

PostPosted: Tue Jun 19, 2018 3:29 pm    Post subject: Re: Oliver plow Reply to specific post Reply with quote

CVPost-OliverNate wrote:
(quoted from post at 15:17:16 06/19/1Cool I think I took 6.00-16s off on mine but put 6.50-16s on because thats what I had.


Any idea what radial tire would fit in it? Have a few lying around
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Oliver, Cletrac, Coop and Cockshutt All times are GMT - 8 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters