Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

John Deere Loader Identification


 
Post new topic    
View previous topic :: View next topic  
Author Message
attilajohndeere
New User


Joined: 11 Jun 2018
Posts: 5


Report to Moderator

PostPosted: Mon Jun 11, 2018 12:50 pm    Post subject: John Deere Loader Identification Reply to specific post Reply with quote

I recently purchased a John Deere 2630 utility tractor with a JD loader attached. The s/n tags were missing for both tractor and loader. I was able to track down the s/n of the tractor and it is a 1975. I can't identify the loader as the model number is peeled off of the masts where you would normally see it. One thing unique is it has the single bucket dump cylinder vs two dump cylinders that are found on newer loaders. Is there anything unique around the loader control block or operator's handles by model? Can anyone identify what model of loader this is or tell me what to look for to determine model? Could it be a Model 47? I want to obtain the parts catalog to order parts and any other manuals for this loader but want to be sure of the model before purchasing parts and manuals.
 
Back to top
View user's profile
tomstractorsandtoys
Tractor Expert


Joined: 30 Nov 2010
Posts: 2407


Report to Moderator

PostPosted: Mon Jun 11, 2018 2:20 pm    Post subject: Re: John Deere Loader Identification Reply to specific post Reply with quote

You most likely have a 48 loader. Could be a 143 but they were for the smaller tractors and should not be found on your tractor. Google images for 48 loader. There is also the chance that you have an off brand loader painted green. Post a pic and we can help. Tom
 
Back to top
View user's profile
JD Seller
Tractor Guru


Joined: 11 Mar 2009
Posts: 16595


Report to Moderator

PostPosted: Mon Jun 11, 2018 9:21 pm    Post subject: Re: John Deere Loader Identification Reply to specific post Reply with quote

I will second it more than likely being a JD 48 loader. The one in the picture is a JD 48 mounted on a JD 2020. So it should look just like yours.

 
Back to top
View user's profile
8850dave
Long Time User


Joined: 25 Mar 2005
Posts: 614


Report to Moderator

PostPosted: Tue Jun 12, 2018 3:26 am    Post subject: Re: John Deere Loader Identification Reply to specific post Reply with quote

The loader mounting brackets will tell what mdel possibly too as newer ones use more flat steel older ones had some cast pieces
 
Back to top
View user's profile
attilajohndeere
New User


Joined: 11 Jun 2018
Posts: 5


Report to Moderator

PostPosted: Tue Jun 12, 2018 8:18 am    Post subject: Re: John Deere Loader Identification Reply to specific post Reply with quote

CVPost-tomstractorsandtoy wrote:
(quoted from post at 17:20:12 06/11/1Cool You most likely have a 48 loader. Could be a 143 but they were for the smaller tractors and should not be found on your tractor. Google images for 48 loader. There is also the chance that you have an off brand loader painted green. Post a pic and we can help. Tom


It is definitely a JD loader. The picture you show of the 48 loader does show a single dump cylinder but it looks like it is fastened to the center tube with a casting and mine shows a couple of U-Bolts to fasten the cylinder to the center tube. The model 47 loader also shows a single dump cylinder. I could get my spouse to take a picture with her smartphone but how do I post it here for you guys to see? Roger
 
Back to top
View user's profile
attilajohndeere
New User


Joined: 11 Jun 2018
Posts: 5


Report to Moderator

PostPosted: Tue Jun 12, 2018 9:56 am    Post subject: Re: John Deere Loader Identification Reply to specific post Reply with quote

attilajohndeere wrote:
(quoted from post at 11:18:25 06/12/1Cool
CVPost-tomstractorsandtoy wrote:
(quoted from post at 17:20:12 06/11/1Cool You most likely have a 48 loader. Could be a 143 but they were for the smaller tractors and should not be found on your tractor. Google images for 48 loader. There is also the chance that you have an off brand loader painted green. Post a pic and we can help. Tom


It is definitely a JD loader. The picture you show of the 48 loader does show a single dump cylinder but it looks like it is fastened to the center tube with a casting and mine shows a couple of U-Bolts to fasten the cylinder to the center tube. The model 47 loader also shows a single dump cylinder. I could get my spouse to take a picture with her smartphone but how do I post it here for you guys to see? Roger


I think I figured out how to post pictures of the loader. Here are 2 pictures showing the single dump cylinder area. Does anyone need more info. Does anyone know the difference between a 48 vs a 47 loader as they both have a single cylinder bucket control? Thanks for your help.
Roger
 
Back to top
View user's profile
attilajohndeere
New User


Joined: 11 Jun 2018
Posts: 5


Report to Moderator

PostPosted: Wed Jun 13, 2018 9:02 am    Post subject: Re: John Deere Loader Identification Reply to specific post Reply with quote

CVPost-tomstractorsandtoy wrote:
(quoted from post at 17:20:12 06/11/1Cool You most likely have a 48 loader. Could be a 143 but they were for the smaller tractors and should not be found on your tractor. Google images for 48 loader. There is also the chance that you have an off brand loader painted green. Post a pic and we can help. Tom


I agree with all of you that what I got was a 48 loader. I checked out the 47 loader and it does not mount to the tractor with the same frame as the 48. My loader looks identical to the 48 along with how the single bucket cylinder mounts on the center tube. Thanks everyone.
Another question about the loader stand that is missing. As I to replace the clutch on the 2630 I need to remove the loader but I believe that there should be some type of stand that can swing down and hold the loader while backing out from under it. Anyone have info on that? Thanks.
 
Back to top
View user's profile
ss55
Tractor Guru


Joined: 05 Dec 2011
Posts: 6217


Report to Moderator

PostPosted: Wed Jun 13, 2018 6:07 pm    Post subject: Re: John Deere Loader Identification Reply to specific post Reply with quote

The stands were very simple but they were separate from the loader. The owners manual should have some pictures of the stands. You could weld up a set using 3 or 4 inch square steel tubing and 1/4 inch plus thick plate.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Implement Alley All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters