Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

super M


 
Post new topic    
View previous topic :: View next topic  
Author Message
gburt
New User


Joined: 09 Aug 2016
Posts: 16
Location: Butte MT

Report to Moderator

PostPosted: Thu Jun 14, 2018 8:44 am    Post subject: super M Reply to specific post Reply with quote

Having problems with the throttle on our super M it does not rev up like it used to.I have adjusted the linkage but that did not seem to help I was just wondering if their was some else I was missing.
 
Back to top
View user's profile
used red MN
Long Time User


Joined: 24 Aug 2013
Posts: 1056
Location: Coon Rapids, MN

Report to Moderator

PostPosted: Thu Jun 14, 2018 9:25 am    Post subject: Re: super M Reply to specific post Reply with quote

If no extreme wear or bending in the throttle linkage then the governor spring number 49 on the
attached parts page may be your problem. Otherwise wear in parts 39-46 contribute to this issue.
SM IH governor parts page

 
Back to top
View user's profile
old
Tractor Guru


Joined: 12 Mar 2000
Posts: 77909
Location: Lake of the Ozarks area of MO

Report to Moderator

PostPosted: Thu Jun 14, 2018 9:25 am    Post subject: Re: super M Reply to specific post Reply with quote

Have you had the carb off?? If yes you may not have the gov to carb hooked up correctly.
 
Back to top
View user's profile
gburt
New User


Joined: 09 Aug 2016
Posts: 16
Location: Butte MT

Report to Moderator

PostPosted: Thu Jun 14, 2018 11:26 am    Post subject: Re: super M Reply to specific post Reply with quote

CVPost-old wrote:
(quoted from post at 10:25:26 06/14/1Cool Have you had the carb off?? If yes you may not have the gov to carb hooked up correctly.


whats a good way to see if its hooked up correctly ?
 
Back to top
View user's profile
old
Tractor Guru


Joined: 12 Mar 2000
Posts: 77909
Location: Lake of the Ozarks area of MO

Report to Moderator

PostPosted: Thu Jun 14, 2018 12:11 pm    Post subject: Re: super M Reply to specific post Reply with quote

That can be hard to explain. The carb linkage has a small slot that hooks to the governor and if not in that slot it is hooked up wrong.
 
Back to top
View user's profile
used red MN
Long Time User


Joined: 24 Aug 2013
Posts: 1056
Location: Coon Rapids, MN

Report to Moderator

PostPosted: Thu Jun 14, 2018 7:57 pm    Post subject: Re: super M Reply to specific post Reply with quote

You basically have to pull the carb down or take the two bolts out that hold no. 19 to the governor
housing. Number 23 in the diagram is the shaft that moves the motion from the governor to the
carb. It is in side the horizontal tube that connects to the carb. The tang sticking out the right end
in the diagram goes in a notch on the end of the throttle plate shaft. If you had the carb off it could
likely not be in the right place. It is real tricky to get back in correctly. Just takes some time and
patience. If you had the carb off check this first. Otherwise let us know and we?ll give more details
on other adjustments.
 
Back to top
View user's profile
gburt
New User


Joined: 09 Aug 2016
Posts: 16
Location: Butte MT

Report to Moderator

PostPosted: Sun Jun 17, 2018 8:26 pm    Post subject: Re: super M Reply to specific post Reply with quote

every thing looks like it is hooked up right
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Farmall & International Harvester (IHC) All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters