Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Case 188d Rebuild


 
Post new topic    
View previous topic :: View next topic  
Author Message
Pete14
New User


Joined: 10 Oct 2018
Posts: 2


Report to Moderator

PostPosted: Wed Oct 10, 2018 3:48 pm    Post subject: Case 188d Rebuild Reply to specific post Reply with quote

Hey guys Im new to this forum thing but i am rebuilding a case 188d out of a 1967 580 CK. Anyway i took the engine to a machine shop and the guy asked what the clearance from the valve to deck height is
 
Back to top
View user's profile
george md
Tractor Expert


Joined: 22 Oct 2001
Posts: 2310
Location: Whiteford , Md

Report to Moderator

PostPosted: Wed Oct 10, 2018 7:55 pm    Post subject: Re: Case 188d Rebuild Reply to specific post Reply with quote


Valve recession or protrusion for 188 d is .005 above to .015 below deck.

AERA spec manual gives these numbers , surprised the shop doesn't have one.

george
 
Back to top
View user's profile
Pete14
New User


Joined: 10 Oct 2018
Posts: 2


Report to Moderator

PostPosted: Thu Oct 11, 2018 2:20 am    Post subject: Re: Case 188d Rebuild Reply to specific post Reply with quote

CVPost-george md wrote:
(quoted from post at 20:55:42 10/10/1Cool
Valve recession or protrusion for 188 d is .005 above to .015 below deck.

AERA spec manual gives these numbers , surprised the shop doesn't have one.

george


This particular Shop doesn't typically do these engines so he asked me to find that info. All the other info I needed was in the manual I had that he needed. That was the only thing missing. Thanks for the info I will let them know.
 
Back to top
View user's profile
MSM
Tractor Expert


Joined: 05 Jun 1999
Posts: 1884


Report to Moderator

PostPosted: Thu Oct 11, 2018 10:31 am    Post subject: Re: Case 188d Rebuild Reply to specific post Reply with quote

I would keep the valve protrusion at .0 to .005 above. This will aid in easier cold weather starting and cleaner running under load.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Restoration and Repair Tips All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters