Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Going To A New Home

Goto page 1, 2  Next

 
Post new topic    
View previous topic :: View next topic  
Author Message
Agri King
Long Time User


Joined: 05 Mar 2009
Posts: 1479


Report to Moderator

PostPosted: Thu Mar 27, 2014 4:13 pm    Post subject: Going To A New Home Reply to specific post Reply with quote

This 1977 1370 was found in northern Illinois by another
member here. 3520 one owner hours. I found it a new home
in the dairy state. It will join a 1175,1070,970,& a 1030 on a WI
dairy farm. Sounds like it will be on chopper & field cultivator
duty.


 
Back to top
View user's profile
Paul A Young
Long Time User


Joined: 13 Mar 2010
Posts: 698


Report to Moderator

PostPosted: Thu Mar 27, 2014 4:38 pm    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

Looks like a nice one, that will be a nice step up for them.
It looks like it has 18.4X38 rubber,I never could figure out why case sold so many 1370 and 2390's with that small of rubber.Wouldn't 20.8X38 be a better choice for that kind of HP ?
 
Back to top
View user's profile
RandyB(MI)
Tractor Guru


Joined: 06 Jan 2006
Posts: 5568
Location: Mt. Pleasant , MI.

Report to Moderator

PostPosted: Thu Mar 27, 2014 4:59 pm    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

probably same reason they put 7.75x14 tires on a '65 GTO with 360 hp. making the traction the "weak point" saves on the more expensive "weak points" and gets it off warrantee.
 
Back to top
View user's profile
Moline_guy
Tractor Expert


Joined: 07 Aug 2006
Posts: 1847
Location: Northcentral SD

Report to Moderator

PostPosted: Thu Mar 27, 2014 5:24 pm    Post subject: Re: Going To A New Home Reply to specific post Reply with quote


When my uncle bought his 1270 back in the mid 70's it had 20.8-38's on, but he made the dealer swap them out for 18.4-38's. He thought the 20's were too wide to run in the plow furrow.
 
Back to top
View user's profile
Don Rudolph
Tractor Expert


Joined: 29 Aug 2010
Posts: 3031


Report to Moderator

PostPosted: Thu Mar 27, 2014 5:25 pm    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

Wish it was going to my home! I guess it proves there are still a few low houred 70 series out there yet. Don
 
Back to top
View user's profile
Kow Farmer
Tractor Expert


Joined: 01 Mar 2003
Posts: 2107


Report to Moderator

PostPosted: Thu Mar 27, 2014 5:47 pm    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

Eric,
That is a sweet lookin' 1370! Great find. Best of luck with the ol' beast. She looks to be in great condition yet. Thanks for the pics. I would love to own one of those someday....
Kow Farmer Kurt
 
Back to top
View user's profile
JW
Long Time User


Joined: 26 May 1998
Posts: 1136


Report to Moderator

PostPosted: Thu Mar 27, 2014 5:56 pm    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

That's a Hextell implement tractor. Pretty sure you have them on your list don't you Don?
 
Back to top
View user's profile
Don Rudolph
Tractor Expert


Joined: 29 Aug 2010
Posts: 3031


Report to Moderator

PostPosted: Thu Mar 27, 2014 6:17 pm    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

Yup! Hextell Implment Case/AC Serena, IL. They sold a lot of obsolete equipment to our local horse jockey/Case dealer. Thanks for thinking about me. Don
 
Back to top
View user's profile
Don Rudolph
Tractor Expert


Joined: 29 Aug 2010
Posts: 3031


Report to Moderator

PostPosted: Thu Mar 27, 2014 6:21 pm    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

Joe,

Ever hear of Raymond Dittmer, Scales Mound, IL?

Was a dealer in the early 50's, for sure. Thanks again, Don
 
Back to top
View user's profile
JW
Long Time User


Joined: 26 May 1998
Posts: 1136


Report to Moderator

PostPosted: Thu Mar 27, 2014 7:00 pm    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

I knew they had a dealer at one time but never knew who it was
 
Back to top
View user's profile
Lazy WP
Tractor Expert


Joined: 28 Jan 2012
Posts: 1577


Report to Moderator

PostPosted: Fri Mar 28, 2014 5:15 am    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

Try getting 20.8s down a 30 inch corn row. I needed 14.9s Sad Never could follow a row.
 
Back to top
View user's profile
Brokengun
Long Time User


Joined: 30 Jun 2009
Posts: 1234


Report to Moderator

PostPosted: Fri Mar 28, 2014 8:56 am    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

that's a nice looking 1370. I would like to have another 1370.

I would like to have another case tractor in the herd but my better half says I'm just trying to be another casenutty!
 
Back to top
View user's profile
1370rod
Tractor Guru


Joined: 07 Mar 2012
Posts: 4725


Report to Moderator

PostPosted: Fri Mar 28, 2014 9:54 am    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

Eric that is a nice clean one. Just curious if you can tell if the rear axle housings have ever been off. Rod.
 
Back to top
View user's profile
Agri King
Long Time User


Joined: 05 Mar 2009
Posts: 1479


Report to Moderator

PostPosted: Fri Mar 28, 2014 9:59 am    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

Paul, 20.8 38s would be 1st choice also if not needed for row cropping. I tell guys to put 20.8s on 1175s also, if they are going to pull them in the field.
 
Back to top
View user's profile
Agri King
Long Time User


Joined: 05 Mar 2009
Posts: 1479


Report to Moderator

PostPosted: Fri Mar 28, 2014 10:02 am    Post subject: Re: Going To A New Home Reply to specific post Reply with quote

Rod it doesn't appear that the axle housings have been off.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Case and David Brown All times are GMT - 8 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters