Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

adjusting shift linkage quad range


 
Post new topic    
View previous topic :: View next topic  
Author Message
NHbalerman
Regular


Joined: 07 Oct 2007
Posts: 194


Report to Moderator

PostPosted: Mon Oct 16, 2017 5:13 pm    Post subject: adjusting shift linkage quad range Reply to specific post Reply with quote

How do I adjust the linkage on the shift levers on my 4030 quadrange? Also the two speed the lever moves to the left a long ways before it will shift just seems like they all need a good adjusting. It has the 4 post canopy on it and I was wondering about the bushings on top of the axle to cab how can I tell if they are worn out and need replacing? Thanks
 
Back to top
View user's profile
tim s
Tractor Guru


Joined: 01 Nov 2008
Posts: 11510
Location: Somerset Ohio

Report to Moderator

PostPosted: Tue Oct 17, 2017 6:49 am    Post subject: Re: adjusting shift linkage quad range Reply to specific post Reply with quote

Most of the time if the shifter gets out of wack with the quadrant plate it's because the cab/platform has settled or moved,,the other times when it "seems" like it needs adjusted the sychronizer is bad. But to adjust it you find the "happy" spot on the shift position to the guide plate in the cab and adjust the linkage rod till the shifter sets in the plate nicely in the correct place. It is hard to explain, but for instance if the range lever is in "D" position and id needs to go a bit more to set in the cradle of the plate, and when it in "A" position and it needs to go forward a bit to rest in the cradle the rod would need adjusted to make that all work out,,normally when it fits nice in A and D the B&C is correct also,, same with the other shifter, and same idea with a sychro range.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> John Deere All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters