Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

300 utility hyd. lines


 
Post new topic    
View previous topic :: View next topic  
Author Message
Lee Tho
Regular


Joined: 02 May 2015
Posts: 35


Report to Moderator

PostPosted: Wed Nov 22, 2017 1:36 pm    Post subject: 300 utility hyd. lines Reply to specific post Reply with quote

does any one know if the 300 utility hyd lines between the pump and unit have o rings or gaskets at each ends the manual I have does not show these lines when I bought this tractor the lines were off I tried o rings and they blew right out thanks in advance for any help lee
 
Back to top
View user's profile
Duner Wi
Tractor Guru


Joined: 04 Feb 2001
Posts: 3710


Report to Moderator

PostPosted: Wed Nov 22, 2017 3:08 pm    Post subject: Re: 300 utility hyd. lines Reply to specific post Reply with quote

My 350U has "O" rings.
 
Back to top
View user's profile
MARK ROBKE
Long Time User


Joined: 12 Jun 2010
Posts: 1336


Report to Moderator

PostPosted: Wed Nov 22, 2017 4:38 pm    Post subject: Re: 300 utility hyd. lines Reply to specific post Reply with quote

They are o rings.Mark
 
Back to top
View user's profile
pinball
Long Time User


Joined: 13 Jun 2007
Posts: 903


Report to Moderator

PostPosted: Thu Nov 23, 2017 5:40 pm    Post subject: Re: 300 utility hyd. lines Reply to specific post Reply with quote

Did you just buy o rings at your local parts store. I went to buy some o rings for my hydraulics on my dozer. Found some the same size at the local parts store but he couldn't answer my question about them being used In my hydraulics so I stopped by the cat place and asked them. they always replace any hyd hose I need and seem to be very knowledgeable. He told me you need the correct o ring for the hydraulics. Some will have low pressure and some hi pressure and the material there made of makes a big difference. I used his o rings and rebuilt my hydraulic controls and they have never leaked. Don't know if this will but good luck with your problem.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Farmall & International Harvester (IHC) All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters