Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Not Familiar with is on my 2N


 
Post new topic    
View previous topic :: View next topic  
Author Message
nashranch
Regular


Joined: 19 Oct 2016
Posts: 256


Report to Moderator

PostPosted: Thu Jan 11, 2018 4:50 pm    Post subject: Not Familiar with is on my 2N Reply to specific post Reply with quote

Anybody familiar with this equalizer on my 2N?..looks to be a friction device on my draft control
 
Back to top
View user's profile
nashranch
Regular


Joined: 19 Oct 2016
Posts: 256


Report to Moderator

PostPosted: Thu Jan 11, 2018 4:53 pm    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

nashranch wrote:
(quoted from post at 17:50:28 01/11/1Cool Anybody familiar with this equalizer on my 2N?..looks to be a friction device on my draft control

 
Back to top
View user's profile
ZANE
Tractor Guru


Joined: 10 Aug 1998
Posts: 10895


Report to Moderator

PostPosted: Thu Jan 11, 2018 5:04 pm    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

That is an early attempt to give the 2N position/height control. Take it off and put it up on a shelf for history and then get my "Zane Thang"
position control device. It works.

Zane
 
Back to top
View user's profile
nashranch
Regular


Joined: 19 Oct 2016
Posts: 256


Report to Moderator

PostPosted: Thu Jan 11, 2018 5:08 pm    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote


Thanks Zane...glad it wasn't yer first attempt at the "Zane Thang"

This tractor had a big and heavy 7' Disc harrow on the back of it when I got it plus the lift arms are really beefed up
 
Back to top
View user's profile
Kirk-NJ
Tractor Guru


Joined: 10 Dec 2006
Posts: 4049


Report to Moderator

PostPosted: Fri Jan 12, 2018 3:05 am    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

Thanks for posting the photo, Nash. I've seen other position control gizmos but not this one. Can you post a photo of the back side where the wing nut slide bolt is? Also what is the bracket that
is bolted to the trumpet?

Kirk
 
Back to top
View user's profile
steve19438
Tractor Expert


Joined: 30 May 2011
Posts: 2921
Location: harleysville pa

Report to Moderator

PostPosted: Fri Jan 12, 2018 4:31 am    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

under the wing nut I looks like it is out of California. any chance you could take a pic of what is written under the wing nut?
 
Back to top
View user's profile
Kirk-NJ
Tractor Guru


Joined: 10 Dec 2006
Posts: 4049


Report to Moderator

PostPosted: Fri Jan 12, 2018 5:52 am    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

Tractor sales corp
Los Angeles, Calif
They also made and sold the Everett Trans/trencher This might also be the reason you don't see many everett trans on the east coast
 
Back to top
View user's profile
nashranch
Regular


Joined: 19 Oct 2016
Posts: 256


Report to Moderator

PostPosted: Fri Jan 12, 2018 7:14 am    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

CVPost-Kirk-NJ wrote:
(quoted from post at 04:05:18 01/12/1Cool Thanks for posting the photo, Nash. I've seen other position control gizmos but not this one. Can you post a photo of the back side where the wing nut slide bolt is? Also what is the bracket that
is bolted to the trumpet?

Kirk


Nothing bolted to the trumpet Kirk


 
Back to top
View user's profile
nashranch
Regular


Joined: 19 Oct 2016
Posts: 256


Report to Moderator

PostPosted: Fri Jan 12, 2018 7:16 am    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

CVPost-steve19438 wrote:
(quoted from post at 05:31:41 01/12/1Cool under the wing nut I looks like it is out of California. any chance you could take a pic of what is written under the wing nut?


Here ya go Steve


 
Back to top
View user's profile
TomT
Regular


Joined: 20 Sep 2008
Posts: 22
Location: Pratt Kansas

Report to Moderator

PostPosted: Fri Jan 12, 2018 7:17 am    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

nashranch wrote:
(quoted from post at 01:50:28 01/12/1Cool Anybody familiar with this equalizer on my 2N?..looks to be a friction device on my draft control


lots of neat stuff to look at in the second photo...Under the 2N part number casting is where they cast the date when the axle trumpets were actually cast at the foundry...I`ve only noticed this date on late 2n, and early 8n (47, 48, and 49) trumpets... that doesn`t mean the tractor was actually made on that date, but it would help identify the approximate year the tractor was assembled.

I`ve only found the casting date on the right hand trumpets...but they could have dated the other side also.

I noticed the really nice return spring on the brake pedal, and the curved bracket that holds the aftermarket running board.

I`ve also noticed a casting date on the aluminum hydraulic pumps, on some tractors.

Neat tractor, Nash!
 
Back to top
View user's profile
nashranch
Regular


Joined: 19 Oct 2016
Posts: 256


Report to Moderator

PostPosted: Fri Jan 12, 2018 7:20 am    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

Some pics of the beefed up 3 point lift arms and the bracketing on the big spring



Remember this tractor had a big heavy 7' disc harrow on the back when I got it
 
Back to top
View user's profile
steve19438
Tractor Expert


Joined: 30 May 2011
Posts: 2921
Location: harleysville pa

Report to Moderator

PostPosted: Fri Jan 12, 2018 9:55 am    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

good pic. thanks. can't find anything so far on the net. frustrating.
 
Back to top
View user's profile
HFJ
Tractor Expert


Joined: 01 Nov 2015
Posts: 1672


Report to Moderator

PostPosted: Fri Jan 12, 2018 10:26 am    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

TomT wrote:
(quoted from post at 11:17:10 01/12/18 )
Under the 2N part number casting is where they cast the date when the axle trumpets were actually cast at the foundry...I`ve only noticed this date on late 2n, and early 8n (47, 48, and 49) trumpets... that doesn`t mean the tractor was actually made on that date, but it would help identify the approximate year the tractor was assembled.

I`ve only found the casting date on the right hand trumpets...but they could have dated the other side also.


tom, my 47 2N has dates on both trumpets. one was cast on january 2nd, 1947, and the other was on the 3rd. ya, it's another piece to help answer the question of when it was built. in my case, the dates on the trumpets correspond nicely with the serial number.
 
Back to top
View user's profile
nashranch
Regular


Joined: 19 Oct 2016
Posts: 256


Report to Moderator

PostPosted: Fri Jan 12, 2018 11:24 am    Post subject: Re: Not Familiar with is on my 2N Reply to specific post Reply with quote

TomT wrote:
(quoted from post at 08:17:10 01/12/1Cool
nashranch wrote:
(quoted from post at 01:50:28 01/12/1Cool Anybody familiar with this equalizer on my 2N?..looks to be a friction device on my draft control


lots of neat stuff to look at in the second photo...Under the 2N part number casting is where they cast the date when the axle trumpets were actually cast at the foundry...I`ve only noticed this date on late 2n, and early 8n (47, 48, and 49) trumpets... that doesn`t mean the tractor was actually made on that date, but it would help identify the approximate year the tractor was assembled.

I`ve only found the casting date on the right hand trumpets...but they could have dated the other side also.

I noticed the really nice return spring on the brake pedal, and the curved bracket that holds the aftermarket running board.

I`ve also noticed a casting date on the aluminum hydraulic pumps, on some tractors.

Neat tractor, Nash!



Tell ya what fellas...I paid $300 for this tractor..Sept. 2016.With it came a 7' wide disc unit, two single bottom plows and a box full of tractor parts. The engine was flat worn out so I pulled that block and sold it fairly cheap to a guy that wanted to rebuild it. I bought another block complete and in fairly good shape. I sold the disc unit for $275, the two single bottom plows for $150 each. So basically ii have a free tractor sitting here.



A few pics of this beauty outstanding in its field





 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Ford 9N, 2N, 8N All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters