Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Switching TO 35 exhaust from horizontal to vertical.

Goto page 1, 2  Next

 
Post new topic    
View previous topic :: View next topic  
Author Message
wombat blues
New User


Joined: 01 Feb 2018
Posts: 4


Report to Moderator

PostPosted: Thu Feb 01, 2018 4:19 pm    Post subject: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

Has anyone changed their TO 35 Deluxe horizontal exhaust to a vertical exhaust? I spoke to Dave at Yesterday's Tractor and he said to use manifold elbow 181886M2 and vertical muffler S43644. Dave also said the diameter of the muffler is 4 1/2 inches. My question is will this exhaust assembly clear the tractor body and not lean against my original Ferguson Deluxe decal? I have the Continental engine and the tractor is a 1958 model. Thanks in advance for any help.
 
Back to top
View user's profile
Ron(Ont)
Regular


Joined: 12 Feb 2015
Posts: 144
Location: Ontario, Canada

Report to Moderator

PostPosted: Fri Feb 02, 2018 12:42 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote


Over 50 reads and no replies. Sad I cannot speak with absolute certainty, but I have two TEA's, one with a vertical exhaust and the muffler clears the hood okay. When the hood is part way up, there is some sway. So, you might have to guide it up and down a little.
 
Back to top
View user's profile
54FergieTO30
Regular


Joined: 14 Nov 2016
Posts: 93


Report to Moderator

PostPosted: Fri Feb 02, 2018 3:37 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

wombat blues wrote:
(quoted from post at 17:19:06 02/01/1Cool Has anyone changed their TO 35 Deluxe horizontal exhaust to a vertical exhaust? I spoke to Dave at Yesterday's Tractor and he said to use manifold elbow 181886M2 and vertical muffler S43644. Dave also said the diameter of the muffler is 4 1/2 inches. My question is will this exhaust assembly clear the tractor body and not lean against my original Ferguson Deluxe decal? I have the Continental engine and the tractor is a 1958 model. Thanks in advance for any help.


I have a 1963 MF 35 Deluxe with the z134 and a vertical exhaust. I will try to post some pics this weekend of the clearance it has with the hood. There is not much.
 
Back to top
View user's profile
wombat blues
New User


Joined: 01 Feb 2018
Posts: 4


Report to Moderator

PostPosted: Fri Feb 02, 2018 4:12 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

54FergieTO30 wrote:
(quoted from post at 16:37:10 02/02/1Cool
wombat blues wrote:
(quoted from post at 17:19:06 02/01/1Cool Has anyone changed their TO 35 Deluxe horizontal exhaust to a vertical exhaust? I spoke to Dave at Yesterday's Tractor and he said to use manifold elbow 181886M2 and vertical muffler S43644. Dave also said the diameter of the muffler is 4 1/2 inches. My question is will this exhaust assembly clear the tractor body and not lean against my original Ferguson Deluxe decal? I have the Continental engine and the tractor is a 1958 model. Thanks in advance for any help.


I have a 1963 MF 35 Deluxe with the z134 and a vertical exhaust. I will try to post some pics this weekend of the clearance it has with the hood. There is not much.



Thanks. I wait for the pics. Much appreciated.
 
Back to top
View user's profile
Benj R
Long Time User


Joined: 12 Oct 2015
Posts: 504


Report to Moderator

PostPosted: Fri Feb 02, 2018 6:16 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

I found these pictures on the net, they may or may not help you. I have a 55 TO35
deluxe but it has a horizontal exhaust.




 
Back to top
View user's profile
wombat blues
New User


Joined: 01 Feb 2018
Posts: 4


Report to Moderator

PostPosted: Sat Feb 03, 2018 7:02 am    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

CVPost-Benj R wrote:
(quoted from post at 19:16:34 02/02/1Cool I found these pictures on the net, they may or may not help you. I have a 55 TO35
deluxe but it has a horizontal exhaust.





Wow, thanks for the pics. That really helps.
 
Back to top
View user's profile
wellmax99
Long Time User


Joined: 21 Mar 2013
Posts: 1203


Report to Moderator

PostPosted: Sat Feb 03, 2018 12:12 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

I switched my TO35 from horizontal to vertical exhaust after catching the corn field on fire picking corn,

But I no longer use the tractor to pick corn,

So I switched back to a horizontal exhaust system, did not like the noise and sometimes if the wind was just right, l would get exhaust smell,
Plus had to watch so close for limbs when bush hogging under fruit trees and fence rows
 
Back to top
View user's profile
54FergieTO30
Regular


Joined: 14 Nov 2016
Posts: 93


Report to Moderator

PostPosted: Sat Feb 03, 2018 2:08 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

54FergieTO30 wrote:
(quoted from post at 16:37:10 02/02/1Cool
wombat blues wrote:
(quoted from post at 17:19:06 02/01/1Cool Has anyone changed their TO 35 Deluxe horizontal exhaust to a vertical exhaust? I spoke to Dave at Yesterday's Tractor and he said to use manifold elbow 181886M2 and vertical muffler S43644. Dave also said the diameter of the muffler is 4 1/2 inches. My question is will this exhaust assembly clear the tractor body and not lean against my original Ferguson Deluxe decal? I have the Continental engine and the tractor is a 1958 model. Thanks in advance for any help.


I have a 1963 MF 35 Deluxe with the z134 and a vertical exhaust. I will try to post some pics this weekend of the clearance it has with the hood. There is not much.

 
Back to top
View user's profile
wombat blues
New User


Joined: 01 Feb 2018
Posts: 4


Report to Moderator

PostPosted: Sat Feb 03, 2018 2:17 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote


Thank you for the photos. That really gives me a good visual. I think the elbow you have is the same as the one I'm looking at on YT. Another person posted about exhaust in the face with this set-up. Is that a problem for you? My greatest concern is starting a fire with the horizontal exhaust. Fire danger is high here and I need to clear some rabbit brush. Thanks again for the help.
 
Back to top
View user's profile
54FergieTO30
Regular


Joined: 14 Nov 2016
Posts: 93


Report to Moderator

PostPosted: Sat Feb 03, 2018 2:51 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

I have 1/2 inch gap between muffler and hood
 
Back to top
View user's profile
54FergieTO30
Regular


Joined: 14 Nov 2016
Posts: 93


Report to Moderator

PostPosted: Sat Feb 03, 2018 2:55 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

I have a TO30 with horizontal exhaust and have used it to mow and bush hog for the last 20 years. Haven’t started a fire yet, but I guess the chance is always there. Just bought this MF35 with the vertical exhaust in October and it needed some work so I have not really used it much. The horizontal is definitely quieter. I can’t complain or endorse the vertical until I use it more.
 
Back to top
View user's profile
Charles in Aus.
Tractor Expert


Joined: 16 May 2011
Posts: 1911
Location: Victoria , Australia

Report to Moderator

PostPosted: Sat Feb 03, 2018 3:09 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote


The Australian made spark arresting muffler fitted to my FE35 Grey and Gold has made a mess of the bonnet and emblem .



The problem occurs due to wobble in the front pivot joints , some tractors' bonnets wobble more than others . You can play around by packing the joint on the rhs with washers to give slightly greater clearance on that side .
 
Back to top
View user's profile
Roy Gatewood
Regular


Joined: 05 Mar 2009
Posts: 25


Report to Moderator

PostPosted: Sat Feb 03, 2018 7:20 pm    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

I have TO-30 that had a vertical muffler on it. It had a one piece "U" shape pipe and muffler that
connected to the manifold and a brace that strapped it to the manifold. I burned my arm more than once on
that thing when getting to the tool box in front of the gas tank. I prefer the muffler underneath with
noise and fumes to the rear. Concern for fire is a good reason to go vertical. I have driven that tractor
since 1953.
 
Back to top
View user's profile
Ron(Ont)
Regular


Joined: 12 Feb 2015
Posts: 144
Location: Ontario, Canada

Report to Moderator

PostPosted: Sun Feb 04, 2018 3:07 am    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

I have one of each. The biggest disadvantage of the horizontal exhaust is having to stop and start the engine to hook up an implement. The exhaust is right in your face.
 
Back to top
View user's profile
John Deere D
Tractor Expert


Joined: 14 Jun 2011
Posts: 2568


Report to Moderator

PostPosted: Sun Feb 04, 2018 6:59 am    Post subject: Re: Switching TO 35 exhaust from horizontal to vertical. Reply to specific post Reply with quote

I run a Vertical Muffler on my MF FE 35 X 3 cylinder Diesel:

I must be cognisant of NOT getting close to any low hanging limbs when I'm cutting growth close to trees:

My Ferguson TEA-20 has a horizontal muffler (original. I shut the engine off when attaching rear mounted equipment as it's tough to stand the exhaust fumes:


Bob....
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Harry Ferguson All times are GMT - 8 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters