Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Starting 670 LPG


 
Post new topic    
View previous topic :: View next topic  
Author Message
herald h ia
New User


Joined: 28 Apr 2018
Posts: 9


Report to Moderator

PostPosted: Sun May 20, 2018 6:06 pm    Post subject: Starting 670 LPG Reply to specific post Reply with quote

I have a MM 670 Super LPG, and it will not start. It acts as it is not getting gas. If I give it a whiff of starting fluid, it will start right up. Question is , is there a value that opens on a suction of air when you hit the starter? Thanks for any help.
 
Back to top
View user's profile
16-30 oilpull
Regular


Joined: 24 Oct 2013
Posts: 190


Report to Moderator

PostPosted: Sun May 20, 2018 6:21 pm    Post subject: Re: Starting 670 LPG Reply to specific post Reply with quote

should have a primer button on the evaporator valve that acts like a choke. on my 706 or g1000 I hold it until I hear a bubble sound in breather. I assume 670 is set up same. Be sure you are starting on vapor. Can't really flood them, if you get to much in it will clear out after a little cranking.
 
Back to top
View user's profile
mmfan55
Long Time User


Joined: 14 Sep 2013
Posts: 975


Report to Moderator

PostPosted: Mon May 21, 2018 4:35 pm    Post subject: Re: Starting 670 LPG Reply to specific post Reply with quote

How long since last time it was run? I had one a while back that I had to disassemble regulator and carburetor and give both a thorough cleaning.
 
Back to top
View user's profile
herald h ia
New User


Joined: 28 Apr 2018
Posts: 9


Report to Moderator

PostPosted: Mon May 21, 2018 7:24 pm    Post subject: Re: Starting 670 LPG Reply to specific post Reply with quote

this one has a choke like on a gas engine..It just seems that it has to have something that when you go to start it that something allows gas to get to the carb.It has Bosch fuel system.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Minneapolis Moline All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters