Super 66 3pt ?

Brad Metcalf · Posted: Tue Aug 28, 2012 5:31 pm Post subject: Super 66 3pt ?

Im looking for a picture of the cylinder mounting brackets between the platform and fender and the brackets under the platform any pics will help Thanks Brad

Thompson Mike · Posted: Wed Aug 29, 2012 12:26 am Post subject: Re: Super 66 3pt ?

I will take a few pics and send them your way. I will try to get it done on Wednesday but if I don't get time it will be Friday for sure.

Brad Metcalf · Posted: Wed Aug 29, 2012 1:54 am Post subject: Re: Super 66 3pt ?

Thanks Mike but yours is different you can send them anyway Thanks Brad

B A Star · Posted: Wed Aug 29, 2012 2:12 pm Post subject: Re: Super 66 3pt ?

Here is a photo of a cylincer on a 66 that was at the Summer HPOCA show in Michigan this past June.

Brad Metcalf · Posted: Wed Aug 29, 2012 2:51 pm Post subject: Re: Super 66 3pt ?

Thank You B A Thats part of what Im looking for

Thompson Mike · Posted: Wed Aug 29, 2012 5:42 pm Post subject: Re: Super 66 3pt ?

Here are a couple pics of my 660. I found a note in the owners manual "1971 3pt $250.00" so I believe the second owner of this tractor had the dealer in Santa Maria J&S Equipment put this on the tractor.

Dblair · Posted: Fri Aug 31, 2012 3:21 pm Post subject: Re: Super 66 3pt ?

I see galvanized fittings on the cylinder they are only good for water and not rated for hydraulics when they explode they can cause serious injury up to death . replace with schedule 80 black iron which are good for 3k psi .

Allis Chalmers	Case	Cockshutt	Farmall IH	Ford 8N,9N,2N	Ford
H. Ferguson	John Deere	Massey	Minn. Moline	Oliver	All The Rest