Freeman #90 Loader pic request

[WI Dave]

Do any of you guys have pics of a model 90 Freeman loader on a WD/WD-45 you could post?
 

[minnmach]

I have this loader mounted to a WD45. I also have the owners manual for it. Are you looking for something specific that you want a picture of?
 

[WI Dave]

[mdm1]

My cylinder hoses are hooked together under my tractor and then hooked to a quick release coupler from the pump. Actually the hose goes to a valve so I can isolate my rear lift arms from my loader.
 

[minnmach]

I found the manual at the Orange Spectacular in Hutchinson,Minn. I currently have the two hoses tee'd together and a Quick Disconnect attached to the "T".Since I am not using my rear lift arms I have the hose to the Left one attached to the "T". I will try to send a picture that is in the manual showing how they suggest hooking it up. I like the idea of a shutoff valve so that the rear arms can be used.
 

[minnmach]

pictures

 

[minnmach]

another picture
 

[minnmach]

one more time

 

[mdm1]

Here is how I put the valve on. The middle hose comes from the pump. Then 1 hose goes to the loader and 1 to the rear arms. Mine is plumbed the same under my tractor as the previous illustrations.
 

[mdm1]

minnmach do you have any manual pics of the front of the loader? Mine has a couple of nuts welded on and I think they are for supports for the front when you take the loader off. I am wondering if they are factory or something that was added on. Thanks Mike
 

[minnmach]

The manual doesn't show anything like that and I don't have them on my loader. Must have been added on for the reason that you are thinking. The manual shows a number of accessories for these loaders. I wonder if there is still anything left anywhere. My bucket is in rough shape and I don't have a snow bucket.
 

[mdm1]

I have my snow bucket on my trailer right now to be reinforced. I use it to move dirt sometimes. My manure bucket isn't in too good of shape. You might be able to find a new bucket around.