|
This is the modern view of the Yesterday's Tractors Forums. Just login with your YT Userid and password to post. If you have trouble logging in, contact us by email to support at ytmag.com, or through the Reader Form, and we will get you going right away.
| View previous topic :: View next topic |
| Author |
Message |
new to 9n
New User
Joined: 15 Sep 2012
Posts: 3
Report to Moderator
|
 Posted: Sat Sep 15, 2012 12:06 pm Post subject: hydraulic touch lever position |
  |
|
Hi guys,
I"ve searched through the posts and haven"t found the answer to my problem with my 9N tractor which i aquired from my brother-in-law.
He bought the tractor from someone who restored it, so i have no history on it.
Everything works great except the hydraulic lift.
I have to push the lever all the way down to make it lift. When i pull the lever back upward, even very slowly, the implement drops like a rock.
I know this is not right but i don"t know this tractor at all. Never had one before.
Any help will be appreciated.
Thanks, John
|
|
| Back to top |
|
 |
JMOR
Tractor Guru
Joined: 13 Aug 2007
Posts: 12661
Report to Moderator
|
| Posted: Sat Sep 15, 2012 12:35 pm Post subject: Re: hydraulic touch lever position |
|
|
| new to 9n wrote: | (quoted from post at 16:06:18 09/15/12) Hi guys,
I"ve searched through the posts and haven"t found the answer to my problem with my 9N tractor which i aquired from my brother-in-law.
He bought the tractor from someone who restored it, so i have no history on it.
Everything works great except the hydraulic lift.
I have to push the lever all the way down to make it lift. When i pull the lever back upward, even very slowly, the implement drops like a rock.
I know this is not right but i don"t know this tractor at all. Never had one before.
Any help will be appreciated.
Thanks, John |
Lever position on shaft is probably clocked wrong. Check it.
|
|
| Back to top |
|
|
new to 9n
New User
Joined: 15 Sep 2012
Posts: 3
Report to Moderator
|
| Posted: Sun Sep 16, 2012 1:35 pm Post subject: Re: hydraulic touch lever position |
|
|
Do you mean that the lever itself is bolted on wrong? That seems like a very easy fix. I'll check it.
Thanks - John
|
|
| Back to top |
|
|
new to 9n
New User
Joined: 15 Sep 2012
Posts: 3
Report to Moderator
|
| Posted: Mon Sep 17, 2012 1:34 pm Post subject: Re: hydraulic touch lever position |
|
|
Yep. You were right Bill. Thanks so much. What an easy fix! When i took the lever off and rotated the shaft, it "felt" like it wanted to be in that position.
Thanks again! - John
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
|
|
Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
|
YT Home
| Tractor Manuals
| Tractor Parts
| Forum Home
Copyright © 1997-2013 Yesterday's Tractor Co. - A Washington State Corporation
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
