|
This is the modern view of the Yesterday's Tractors Forums. Just login with your YT Userid and password to post. If you have trouble logging in, contact us by email to support at ytmag.com, or through the Reader Form, and we will get you going right away.
| View previous topic :: View next topic |
| Author |
Message |
tjinny
New User
Joined: 26 Sep 2012
Posts: 4
Report to Moderator
|
 Posted: Wed Sep 26, 2012 9:45 pm Post subject: 530 power steering |
  |
|
Got a 530 with mind of its own here.Seems at start up wheel wants to turn to left on its own ? Looked in couple of old manuals and thought maybe would try to loosen bolts slightly on side of sector and tap slightly either way to center. Did not work. In process of making adapter to check pressure of system . Any ideas greatly appreciated thanks.
|
|
| Back to top |
|
 |
Dodgeit
Long Time User
Joined: 05 Mar 2009
Posts: 845
Report to Moderator
|
| Posted: Thu Sep 27, 2012 10:09 am Post subject: Re: 530 power steering |
|
|
| tjinny wrote: | | (quoted from post at 00:45:46 09/27/12) Got a 530 with mind of its own here.Seems at start up wheel wants to turn to left on its own ? Looked in couple of old manuals and thought maybe would try to loosen bolts slightly on side of sector and tap slightly either way to center. Did not work. In process of making adapter to check pressure of system . Any ideas greatly appreciated thanks. |
Mark the middle of piece, you moved in your post. with a corousponding mark on the housing it bolts to. For conversations sake, I'm talking about the piece that is located on top of the power steering housing, that houses the shaft that the steering shaft is pened to. When you move it 1/32 or less it can make a huge difference. There is a very, very small sweet spot. Don't take all the tension off the four bolts, so that it will only move with the tap of a hammer. if this don't work there are internal parts that need attention.
|
|
| Back to top |
|
|
55deere70
Regular
Joined: 24 Sep 2012
Posts: 253
Location: central Mass
Report to Moderator
|
| Posted: Sat Sep 29, 2012 4:32 pm Post subject: Re: 530 power steering |
|
|
If it wants to turn one way on its own, the steering valve needs to be centered. You can either tap it one way or the other till it stops, or attach a gauge inline on the pressure line and tap the valve housing either way until you get the lowest reading on the gauge.
|
|
| Back to top |
|
|
tjinny
New User
Joined: 26 Sep 2012
Posts: 4
Report to Moderator
|
| Posted: Mon Oct 01, 2012 5:54 pm Post subject: Re: 530 power steering |
|
|
Thanks will try !
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
|
|
Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
|
YT Home
| Tractor Manuals
| Tractor Parts
| Forum Home
Copyright © 1997-2013 Yesterday's Tractor Co. - A Washington State Corporation
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
