MH 44 hitch (am I doomed?)

[Kickstart70]

Hello all, I am just in the process of bringing home my first tractor...a Massey Harris 44 Row-Crop (not sure on year...the serial number plate is gone). This being my first, I didn't know how hard it was going to be to get a 3 point hitch or Hitch-All.

Now I'm concerned that maybe this wasn't the smartest purchase I've ever made, since I was hoping to use this tractor to drive a 3 point post-pounder (which is not purchased yet, thankfully).

Am I out of luck? I've searched for hours trying to find out if there is an after-market hitch for this, without success.
 

[David G]

3 points are hard to find for the 44's. I do not know of an aftermarket. There are used ones on EBAY sometimes. I think that is the best solution, but get ready to pay 500-700 for it. Make sure you get the whole thing with the cylinder, arms and drawbar.
 

[Challengerman]

I have a 44 with a partially home made 3 pt. Tin is
good ,paint is faded.tires stay up but do not
match.runs well. I'll sell whole tractor for $700.
319-240-2766 Dennis
 

[Kickstart70]

Thanks, but it would cost me thousands to get a tractor from Iowa to northern Canada
 

[Ray Mitchler]

There isa 3-point hitch for sale on e-bay right now comlete for $685.00 just look for massey 44 parts.
 

[David G]

I looked at that, it seems complete with cylinder and would buy that if you want one. It will cost you that much to build one.
 

[Kickstart70]

[mattwillson]

Hi, I transfered a case eagle hitch setup onto my MH30, it works perfect
 

[Kickstart70]

[BIG RUH]

THere's one for sale on e bay for $685
 

[Kickstart70]

[mattwillson]

When I put the diesel in it, removed it because I can only run 1 hydraulic pump now.I really didn't need it(I have enough 3 point hitch tractors already) . I'll have to make a drawing of the superstructure for you.
 

[mattwillson]

For $400.00, I'll sell you the kit I made for mine. If you don't mind having J I Case parts on a MH. 519-695-6516
 

[Kickstart70]