|
This is the modern view of the Yesterday's Tractors Forums. Just login with your YT Userid and password to post. If you have trouble logging in, contact us by email to support at ytmag.com, or through the Reader Form, and we will get you going right away.
| View previous topic :: View next topic |
| Author |
Message |
Bus Driver
Tractor Expert
Joined: 22 Nov 2000
Posts: 3123
Report to Moderator
|
 Posted: Sat Oct 13, 2012 1:48 pm Post subject: Woods mower RM59-1 |
  |
|
Working on this mower that rust and abuse have damaged.
The discharge chute #26521 is available new, but I am going to patch the existing one. This chute is on the left side of the mower. If you have one of these mowers, I will be grateful to have the flat top of that chute measured and the longest dimension to the rear point posted.
Thanks for your help.
|
|
| Back to top |
|
 |
Jim in Ma.
Tractor Expert
Joined: 30 Jul 2007
Posts: 1865
Location: Newbury Ma. 01951
Report to Moderator
|
| Posted: Mon Oct 15, 2012 4:20 pm Post subject: Re: Woods mower RM59-1 |
|
|
That chute broke off my mower years ago. Didn't need it anyway.
|
|
| Back to top |
|
|
Duner Wi
Tractor Expert
Joined: 04 Feb 2001
Posts: 2416
Report to Moderator
|
| Posted: Mon Oct 15, 2012 4:57 pm Post subject: Re: Woods mower RM59-1 |
|
|
No chute on mine either. Did not have one from new. I took the plate off the other side and the baffle fell off for the center blade. Did not need that either. Sorry can't be of help. Sorry can't be of help.
|
|
| Back to top |
|
|
david roberson
Regular
Joined: 06 Feb 2010
Posts: 114
Location: indiana
Report to Moderator
|
| Posted: Tue Oct 16, 2012 4:56 pm Post subject: Re: Woods mower RM59-1 |
|
|
i have an rm 360 i get pictures tomorrow also i need a belt diagram and the lady in charge sent me to there service department http://www.woodsequipment.com
|
|
| Back to top |
|
|
david roberson
Regular
Joined: 06 Feb 2010
Posts: 114
Location: indiana
Report to Moderator
|
| Posted: Wed Oct 17, 2012 1:49 pm Post subject: Re: Woods mower RM59-1 |
|
|
here is my mower this is all i have on the chute
|
|
| Back to top |
|
|
Bus Driver
Tractor Expert
Joined: 22 Nov 2000
Posts: 3123
Report to Moderator
|
| Posted: Thu Oct 18, 2012 8:42 am Post subject: Re: Woods mower RM59-1 |
|
|
David, thank you for the photo and your posts. That part of your mower looks different from any I have seen. This thread is now so far down that perhaps no one will look at it again. Today I found a used model 306 on an implement lot. The discharge chute on it was rather beat-up but clearly showed me how mine should look. The RM59-1 and the 306 chutes are not exactly the same, but have the same general shape. I now grasp the concept.
The others who posted probably have mowers that have suffered from the effects of time and rough use- like mine.
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
|
|
Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
|
YT Home
| Tractor Manuals
| Tractor Parts
| Forum Home
Copyright © 1997-2013 Yesterday's Tractor Co. - A Washington State Corporation
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
