3 bottom 3PT. plow

[145 Workhorse]

I will attempt to post a few pictures of this little relic. What colors should it be painted and where can I get decals or a stencil to put the proper lettering on it? Thanks in advance.
 

[145 Workhorse]

Here are some pictures.I want to know what color to paint this implement and where to get decals or the correct stencil. Thanks



 

[oliver fan]

Moline called that plow the M550 series. As you know it is a late model Oliver 3241 plow.

You can get the correct red paint from an AGCO dealer, but if it was mine I would use the ford tractor red that was used on their tractors from 1958 to 1964. As for decals, again if it was mine, I would go to a decal shop with the correct measurements, and have them made. Probably a lot cheaper, too.
 

[oliver fan]

I ment to say that it's a late model 3242 plow. There wasn't any late model 3241 plows.
 

[MMDEL]

The Decal is a 2X29 1/2 inch Yellow Block letter decal. I thought R-M Distributors 712+677-2491 had them, but I don't see them listed in their ad. I have some call me at 815+456-2114. It is one long decal, on that application because of the bolts in the way you have to cut the decal into and place them as you can see on your plow.
MMDEL