|
This is the modern view of the Yesterday's Tractors Forums. Just login with your YT Userid and password to post. If you have trouble logging in, contact us by email to support at ytmag.com, or through the Reader Form, and we will get you going right away.
| View previous topic :: View next topic |
| Author |
Message |
charles brunson
New User
Joined: 25 Oct 2012
Posts: 1
Report to Moderator
|
 Posted: Thu Oct 25, 2012 10:04 am Post subject: oliver 76 grain drill |
  |
|
looking for drive chain for oliver 76 grain drill.
the one that drives the seeder off the drive wheel.
|
|
| Back to top |
|
 |
Cienna
Regular
Joined: 22 Nov 2010
Posts: 156
Report to Moderator
|
| Posted: Thu Oct 25, 2012 3:36 pm Post subject: Re: oliver 76 grain drill |
|
|
Is it the detachable type? If it is, what number is it? I've got chain---some new---depends on the number. Send me an email.
|
|
| Back to top |
|
|
charles h brunson
Guest
Report to Moderator
|
| Posted: Sat Oct 27, 2012 3:07 am Post subject: Re: oliver 76 grain drill |
|
|
son lost chain going down road have nothing to go by.i think it was like a bycycle chain.but about an inch between rollers or pins and about a half or 5/8 wide. it came off the drive wheel and went up to drill to run it.please let me know if u have any like this thanks.
|
|
| Back to top |
|
|
Don-Wi
Tractor Guru
Joined: 12 Aug 2002
Posts: 7659
Location: Hilbert, Wi
Report to Moderator
|
| Posted: Sat Oct 27, 2012 7:16 am Post subject: Re: oliver 76 grain drill |
|
|
If you ask on the Oliver board, someone may know what size/style of chain it was. More than likely, once you figure that out you may be able to get a chunk from a dealer.
Donovan from Wisconsin
|
|
| Back to top |
|
|
90 Percent Retired
Regular
Joined: 05 Mar 2009
Posts: 76
Report to Moderator
|
| Posted: Sat Oct 27, 2012 7:19 am Post subject: Re: oliver 76 grain drill |
|
|
Most likely it is 2050 extended link. 2050 is 1.25" pitch. 2040 is 1.00" pitch.
Tractor supply stores etc. most any farm equip. dealer will have it.
|
|
| Back to top |
|
|
Leroy
Tractor Guru
Joined: 09 Jan 1998
Posts: 9502
Location: Wapakoneta, Ohio
Report to Moderator
|
| Posted: Sat Oct 27, 2012 3:36 pm Post subject: Re: oliver 76 grain drill |
|
|
I have an older model think 26, has the wood box setting in parts row and it has the 2050 on it. Just wating it's turn to get fixed up. Still need some parts for it and not worth as much as the hay rakes I have been working on rebuilding so it gets put back to the end of the line.
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
|
|
Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
|
YT Home
| Tractor Manuals
| Tractor Parts
| Forum Home
Copyright © 1997-2013 Yesterday's Tractor Co. - A Washington State Corporation
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
