pic of unknown lever

[Hay man we need straw]

Here is a pic of that lever going into the clutch housing

 

[rrlund]

That's just the return spring that hooks to the arm on the throw out bearing. It's not supposed to be hooked there. I don't have the side panels off mine to tell you where it's supposed to hook,but that one looks like somebody just hooked it in the belt pulley rod.
 

[Hay man we need straw]

ok, that explains why my throw out bearing doesent work well, is there suppose to be a good amount of tenstion on it?

Thanks
 

[Hay man we need straw]

p.s. gotta love cobbers
 

[J. Schwiebert]

Somebody took the belt pulley off and did not install the seal retainer. You can tell because they left the belt pulley drive gear on. When the retainer is installed there is a place cast into the retainer where the end of the spring hooks. ou will need a retainer. They are the same for a 77 or 88.
 

[Hay man we need straw]

does anybody have a pic handy?
 

[S.D.L.]

Here is a picture of the bearing/seal retainers you need. Numbers 1 and 2 are for the 77/88's where #3 is for the 770/880's.