Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Ford 5000 Second Hydraulic Remote Not Working


 
Post new topic    
View previous topic :: View next topic  
Author Message
MattL
New User


Joined: 07 Oct 2012
Posts: 7


Report to Moderator

PostPosted: Mon Oct 29, 2012 2:16 pm    Post subject: Ford 5000 Second Hydraulic Remote Not Working Reply to specific post Reply with quote

I've got a Ford 5000 with the new style (after 1970) dual spool valve body on it. The second remote (smaller lever, inboard I believe they call it) flows oil but slowly and won't build enough pressure to pick up an implement. The outboard remote works normally. I believe this is a non-detented valve so only the outboard remote can be converted for single acting cylinders.
My guess would be that the inboard valve spool is screwed up, any thoughts?
Can the spools be repaired/replaced individually or am I looking at $800 for a whole new dual valve body?
Another thing that might be relevent, several years ago it blew a hydraulic hose on the second remote while pulling a 3 point implement. As I remember it would only spray oil when trying to lift the 3 point and I know for a fact that the lever for the second remote was never actuated during the leak.
 
Back to top
View user's profile
Bern
Tractor Guru


Joined: 05 Apr 1999
Posts: 4895


Report to Moderator

PostPosted: Mon Oct 29, 2012 6:20 pm    Post subject: Re: Ford 5000 Second Hydraulic Remote Not Working Reply to specific post Reply with quote

Will it works backwards? In other words, if you swap the hoses and move the spool in the opposite direction, will it work OK then? If so, you have the float or single-acting cylinder screw screwed out. If you look closely at the top of the valve casting, you'll see an arrow cast into the top of the housing pointing to said screw.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Ford All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters