TD9 price guess?

[Case Nutty 1660]

guy's I already have some one wanting me to price this girl, anyone have a avaerage or ball park figuare in mind, not sure I even want to sell it but I really do not need it as I have three Case crawlers already, motor runs very well does need some guages and small here and there things like seat arm rests mainly comsmetic, no major leaks so far hyds seep a little at valve but nothing bad at all cylinders seem to be very good no rod damage and seem sealed well pins about 50% pads good and rails/rollers/sprockets have maybe 20% wear, blade is straight and frog good cutting edge worn 75% on one side can be turned over new on that side, has winch and mechanical angle dozer thanks for any ideas seems to be really a good ole dozer for it's age cnt


 

[Lou from Wi.]

Case Nutty, seeing as how all OLD CRAWLERS are money pits,(or so we read on the internet) we will give you $5.00 and you can haul it up here for free.LOL It is truly a nice looking machine,big enough to do most anything required for a dozer,yet small enough for a small farm or household property. Nice to see someone save em and giving them another chance. LOU
 

[oldtanker]

Around here now about 3500. Couple of years ago that would have gotten real close to 5500.

Rick
 

[the tractor vet]

She looks like a retired il . dozer with the Bucklers Eire blade and winch . The company i worked for had four of them just like it . They will do a days work and make you think you worked two . If it runs good Steers good and the tracks don't fall off on each turn 5500-6500.
 

[Case Nutty 1660]

Thanks again guy's this gives me a range to work with, and yes all does work very well now with the steering clutches and turning brakes as well as the idlers and track seems to be above average, just a estiment of 500.00 bucks would fix guages seat and other small items and then a full service she would be ready for some serious work again thank you again for all the help cnt
 

[gusbratz]

Check out this link for some tips.

http://www.kingofobsolete.ca/TD-6_TD-9_international_check_list.htm

This is the king of obsoletes’ website. He hangs out on the repower website sometime. They have a good section on construction equipment and some very knowledgeable people on the old crawlers.

Here is my TD6 that I built out of scraps of 2 junk machines. It is running working machine and is worth 2500 on a good day, it is getting harder and harder to find parts for because they are worth more as scrap then they are as a running machines. I guess people figure why put the effort into getting one going that has been sitting just to get the same money as what the scrap man will give you. It is worth more to me than what the market will pay for it.
.

 

[Dr. Walt]

According to the reference guide "Antique American Tractor and Crawler Value Guide" by: Terry Dean & Larry L. Swenson (ISBN 0-7603-0976-0) & published in 2001 by MBI Publishing Co., 729 Prospect Ave., PO Box 1 , Osceola, WI 54020-0001 USA - a TD-9 in "Good" condition: $2000. / in "Very Good" condition: $4025. - I hope this helps you .