Massey 165 Parts

[VTParts]

Massey 165 the former owner blew the head gasket and upgraded to a different tractor. Front End has been sold and rear fenders are missing. Lots of good parts.

David
Vermont
802-782-2409
 

[Jason S.]

Hey...I saw where you had posted on my thread where I was looking for the auxiliary pump setup for my 175. What days and times are the best to call? I work until 5:00 everyday so that makes it a little hard to call sometimes. Does that 165 have multipower?
 

[VTParts]

Jason,
I will need to check on Monday to see if the 165 has multipower. We work a Mon - Friday schedule 7:00 - 5:00 but you can call me up until 9:00 Eastern Time and on the weekend if you need to. This tractor is next in line to be taken apart.
Dave
 

[Jason S.]

The reason I was asking is I was thinking that the multipower versions used a split auxiliary pump but the non multipower used a regular auxiliary pump. I can't find any good pics of the auxiliary pump setup to see what will interchange. I even have the factory 175 shop manual and it doesn't even have good pics. Do you happen to know what year that 165 is?
 

[VTParts]

Jason,
I will check the serial number on Monday. We do have a 180 in stock that we will be parting out and that one does have multipower. I have the original MF Parts books for the 175 and 165 so when we dig into this project I will check to see if the parts interchange. Can you please email me a list of the parts that you need?
vermontventuresllc@gmail.com
 

[Bob N.Y.]

Massey Ferguson used several different auxiliary pumps over the years. My 1968 165 with Multi-Power and IPTO originally had a Cesna pump with a flow divider. That pump went bad. There was no rebuild kit for it. The replacement was a Warner-Motive dual pump. There were others too. You won't know what kind of pump it is until you see it.
 

[Kenneth Lyles]

If the 165 rear axles,housing, and stub axles will fit a '58 MF65, I'd be interested in both sides. My stub axle bearing are down..