641 wiring - Where can I get plastic junction block

[RTR]

I am trying to finish the wiring in the 641 tractor and
My old junction block is in terrible shape to not use again. I'd like to get one tonight or tomorrow since I'm so close to being finished. Where can the little guy be bought? Would a local auto parts store have one? It looks pretty universal and simple to me. Thanks!!
 

[souNdguy]

forget it.

junction block was just an inconvienient wireing palce.

your ammeter comes with 2 of them.

wire all electrical laods ( lamps ignition..e tc.. ) to one side.

wire alt or vreg bat connection there as well.

other side of ammeter has only 1 connection.. to hot side of start solenoid.. or battery hot.. same thing...

easiest way to do it..
 

[RTR]

I don't have an ammeter. I have the "idiot light". See attached picture.
 

[RTR]

Pic....

 

[souNdguy]

i keep forgetting about them fuel gauges.

useless things.. I ditch them for ammeters.. :)

in any case.. any insulated connection will work.

heck.. a wire nut.. or piece of palcstinc a nd a small bolt and a couple nuts.

piece of mudflap.. etc... be creative.. ford was..
 

[john in la]

Most any parts store will have one but it will have about 6 connecting points instead of 2 because they deal in cars. Ask for a fuse less terminal block.

If you can not find one you like you can use a bolt and nut wraped in tape to get you by till you can get one.
Anyone that sells Tisco parts can get you the correct one. Ask for part # 8NN14448A
 

[GlenIdaho]

Here's the one John is talking about. Scroll down to see it. It's sold on this site.
Terminal Block