|
This is the modern view of the Yesterday's Tractors Forums. Just login with your YT Userid and password to post. If you have trouble logging in, contact us by email to support at ytmag.com, or through the Reader Form, and we will get you going right away.
| View previous topic :: View next topic |
| Author |
Message |
michigan
Guest
Report to Moderator
|
 Posted: Wed Nov 14, 2012 12:34 pm Post subject: fast hitch to 3 pt |
  |
|
is there any conversion from a fast hitch on a 656 farmall to make it into a 3 point ???????????????
|
|
| Back to top |
|
 |
FC Andy
Regular
Joined: 29 Jun 2001
Posts: 357
Location: Blissfield, MI
Report to Moderator
|
| Posted: Wed Nov 14, 2012 2:58 pm Post subject: Re: fast hitch to 3 pt |
|
|
There are Prongs that go into the fast hitch that are intended for cat 1 or 2 equipment. Then you get a toplink bracket, and bolt it to your tractor for the toplink. I have these setups for my 450 and 806, they work pretty well.
They can be had from A+I parts dealers, and also on EBAY. There are probably other sources, but that's how I've purchased the 2 sets I own. -Andy
|
|
| Back to top |
|
|
mighigan
Guest
Report to Moderator
|
| Posted: Wed Nov 14, 2012 3:52 pm Post subject: Re: fast hitch to 3 pt |
|
|
this tractor has the old style fast hich solid wish bone type like the 560's were not separate lift arms we have the prongs but its not the right with for cat 2 hitch
|
|
| Back to top |
|
|
armand tatro
Tractor Expert
Joined: 13 Feb 2007
Posts: 1535
Report to Moderator
|
| Posted: Wed Nov 14, 2012 5:04 pm Post subject: Re: fast hitch to 3 pt |
|
|
Post a picture of what you have. It should be/could be possible to move shims and/or switch bractets side to side on the adapter you already have. Armand
|
|
| Back to top |
|
|
DeltaRed
Tractor Guru
Joined: 25 Feb 2010
Posts: 6416
Location: Delta,colorado
Report to Moderator
|
| Posted: Wed Nov 14, 2012 5:16 pm Post subject: Re: fast hitch to 3 pt |
|
|
You can buy 'prongs' that are offset for cat 2.My old 2 point had enough slop that the cat 1 'prongs' would work for both 1 & 2.Steve
|
|
| Back to top |
|
|
FC Andy
Regular
Joined: 29 Jun 2001
Posts: 357
Location: Blissfield, MI
Report to Moderator
|
| Posted: Wed Nov 14, 2012 6:46 pm Post subject: Re: fast hitch to 3 pt |
|
|
Yes, Both of my sets have the offset. I have one set of these. Andy
Untitled URL Link
|
|
| Back to top |
|
|
mkirsch
Tractor Guru
Joined: 08 Oct 2007
Posts: 8061
Report to Moderator
|
| Posted: Thu Nov 15, 2012 6:10 am Post subject: Re: fast hitch to 3 pt |
|
|
All you need are the 3pt hitch parts off another 656, or maybe a 544, to turn your 656 into a 3pt tractor.
It's a simple matter of unbolting the fast hitch parts and bolting on the 3pt parts.
If you want to use adapter prongs, you just need to get the right prongs to fit the implement. They don't always build the 3pt implements to the proper dimensions.
|
|
| Back to top |
|
|
Jim in polk co
Regular
Joined: 12 Dec 2007
Posts: 29
Report to Moderator
|
| Posted: Thu Nov 15, 2012 5:42 pm Post subject: Re: fast hitch to 3 pt |
|
|
Okay,( dumb question of the day) I already have the slide in parts to make the 3pt on my 560, what have you guys done for the top link mounting part?
|
|
| Back to top |
|
|
FC Andy
Regular
Joined: 29 Jun 2001
Posts: 357
Location: Blissfield, MI
Report to Moderator
|
| Posted: Fri Nov 16, 2012 1:36 pm Post subject: Re: fast hitch to 3 pt |
|
|
The one on my 450 was home made, and goes over the rockshaft. I don't have a picture of mine right now. I found this while looking for a picture for you, this looks like it bolts up to the rockshaft arms. I'm having a hard time finding a picture of something just like mine, Maybe I'll try to post one for you over the weekend. -Andy
Top link Bracket
Last edited by FC Andy on Fri Nov 16, 2012 2:06 pm; edited 1 time in total |
|
| Back to top |
|
|
jimmyjoe
Regular
Joined: 07 Jul 2003
Posts: 99
Report to Moderator
|
| Posted: Fri Nov 16, 2012 6:00 pm Post subject: Re: fast hitch to 3 pt |
|
|
Here is one I made, and it works good.
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
|
|
Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
|
YT Home
| Tractor Manuals
| Tractor Parts
| Forum Home
Copyright © 1997-2013 Yesterday's Tractor Co. - A Washington State Corporation
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
