power beyond plate

[Melvin Shaw]

Where can I get a "power beyond" plate for a Ford 3600?
 

[shaun wallace]

This site has them. On left side under Marketplace.
 

[Melvin Shaw]

I checked under 3600N,R and V and there isn't one listed unless I missed it?
 

[Sean in PA]

As Shaun said, you can get them here from Yesterday's Tractors. If you truly need "Power Beyond" (for powering multiple implements/control valves in series, like a loader and a backhoe), then go here for the HV5902 kit:

http://www.ytmag.com/HV5902_10670.htm

If you only need pressure and return ports for powering a single control valve setup, like a loader or a log splitter, then you can go a little cheaper with the HV4902 kit here:

http://www.ytmag.com/HV4902_10640.htm
 

[Melvin Shaw]

Thanks, I'm doing this for my dad who is doing it for a friend. I appreciate your help.
 

[RickB]

Properly done, any istallation involving a new remotely mounted spool valve should involve a Power Beyond circuit and dedicated return. The return doesn't have to go back into the plate, it can be connected to the hydraulic fill cap.
 

[David G]

will this work on a 6610, and where does it mount?
 

[RickB]

Won't work on a 10 series 4 cylinder chassis.