Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

WD45 Final Drive


 
Post new topic    
View previous topic :: View next topic  
Author Message
Meangreen
Long Time User


Joined: 08 Aug 2009
Posts: 515


Report to Moderator

PostPosted: Sun Nov 25, 2012 4:08 pm    Post subject: WD45 Final Drive Reply to specific post Reply with quote

2 questions.

1. How do you refill or should I say where do you refill the final drives after you have drained them?

2. What are the bolts in the picture on the final drive for? I can"t locate them in my books or manuals.

 
Back to top
View user's profile
bg/mo
Long Time User


Joined: 28 Apr 2009
Posts: 675


Report to Moderator

PostPosted: Sun Nov 25, 2012 4:16 pm    Post subject: Re: WD45 Final Drive Reply to specific post Reply with quote

The fill plug is on the pan that bolts to the bottom of final drive, it is the check plug and fill plug.The two bolts you have pictured are for a implement mount, such as a bracket for a corn picker.
 
Back to top
View user's profile
Brian G. NY
Tractor Expert


Joined: 13 Mar 2001
Posts: 2156


Report to Moderator

PostPosted: Sun Nov 25, 2012 5:06 pm    Post subject: Re: WD45 Final Drive Reply to specific post Reply with quote

I am truly surprised that your manuals don't address the issue of draining and refilling the final drives.
 
Back to top
View user's profile
Ted in NE-OH
Guest






Report to Moderator

PostPosted: Sun Nov 25, 2012 6:44 pm    Post subject: Re: WD45 Final Drive Reply to specific post Reply with quote

There is no drain plug, only a fill plug. 80-90 wt gear lube.
 
Back to top
Meangreen
Long Time User


Joined: 08 Aug 2009
Posts: 515


Report to Moderator

PostPosted: Mon Nov 26, 2012 5:13 am    Post subject: Re: WD45 Final Drive Reply to specific post Reply with quote

Okay. We thought the plug on the bottom was just a drain plug. Thanks for the info, this is my first AC restore project so it has been a bit interesting!
 
Back to top
View user's profile
dakota dave
Regular


Joined: 31 Jan 2005
Posts: 183


Report to Moderator

PostPosted: Mon Nov 26, 2012 9:09 am    Post subject: Re: WD45 Final Drive Reply to specific post Reply with quote

The only way to drain them is remove the pan from the bottom. the pulg on the pan is the fill level.Its easyist if you shift the wheel al the way out and remove the pan. put about a 1/2 quart gera lube in when you reinstall the pan. Be prepared to do some scraping when you get the pan off. all the ones I"ve done were full of gunk.
 
Back to top
View user's profile
Sal Denio
Guest






Report to Moderator

PostPosted: Sun Dec 02, 2012 6:25 pm    Post subject: Re: WD45 Final Drive Reply to specific post Reply with quote

Regarding the two bolts - I remember a bracket which was used to support the rear of a side mounted mower. Long time ago!!!
 
Back to top
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Allis Chalmers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters