450 lb-ft torque wrench

TheOldHokie · Posted: Thu Dec 13, 2012 7:57 am Post subject: 450 lb-ft torque wrench

For those that want to get it right and don't trust hanging on a cheater bar here is a handy item for your tool chest. A hydraulically actuated torque wrench - appears to come with pump, 1", 3/4". 1/2", aand 3/8" power heads, and a good selection of sockets. You can put it in your Xmas stocking for a mere $15K

Ho, Ho, Ho,

TOH

JMOR · Posted: Thu Dec 13, 2012 8:14 am Post subject: Re: 450 lb-ft torque wrench

I'll take a left & a right one.

HCooke · Posted: Thu Dec 13, 2012 8:50 am Post subject: Re: 450 lb-ft torque wrench

Not sue my 6' pipe cost $15 when I got it 30 years
ago.

Tom N MS · Posted: Thu Dec 13, 2012 3:21 pm Post subject: Re: 450 lb-ft torque wrench

Get two sets and we"ll split the shipping..

Royse · Posted: Thu Dec 13, 2012 4:11 pm Post subject: Re: 450 lb-ft torque wrench

Was that Ho, Ho, Ho or No! No! No! Shocked

heybusdriver · Posted: Thu Dec 13, 2012 7:13 pm Post subject: Re: 450 lb-ft torque wrench

Is this your item? or can you tell us how it
works?

Stan
9N 222933
2N with 8N motor 8N345567
8N 146710
8N 179555
8N 197904
8N 199000
8N 254079
8N 362039

wes(MI) · Regular Joined: 17 Jan 2012 Posts: 56 Report to Moderator

The ones I use at work have interchangeable heads, not
sockets. Interesting. Operating is easy, power to the portable
pump, switch for off/on, flip flop the head for tightening or
loosening. Adjustable psi and conversion charts to lb-ft. Just
watch your fingers, you may NOT keep them if you're not
careful.

McNugget · Regular Joined: 14 Mar 2005 Posts: 83 Report to Moderator

If you want to break things loose, save the
hydraulic hassle, look for a Swench.
Swench

Allis Chalmers	Case	Cockshutt	Farmall IH	Ford 8N,9N,2N	Ford
H. Ferguson	John Deere	Massey	Minn. Moline	Oliver	All The Rest